Table of Contents
Advertisement
3. Press the
4. Use the
select.
5. Select OK to confirm and press the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Formatting your Micro SD Card will delete all files from the card. Once these files have been deleted you will not be able to recover them.
2.5.2 Set Date / Time
Setting the Time and Date allows you to stamp your footage with the time as a reference.
1. Press the
2. Press the
3. Press the
4. Use the
to select.
5. Use the
digit. The final field sets the format that the date will be presented in.
6. To save and exit the time and date, press the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Once the time and date is set it can be stamped onto your footage using the Date Stamp setting. Please see section Date Stamp for more details.
10
(Menu) Button again to enter the Settings Menu .
and
Buttons to navigate the Settings Menu and highlight the Format setting and press
(Rec/Ok) Button.
(Rec/Ok) Button to stop the Car DVR from recording.
(Menu) Button to enter the Video Menu .
(Menu) Button again to enter the Settings Menu .
and
Buttons to navigate the Settings Menu and highlight the Date/Time setting and press
and
buttons to edit the selected digit and the
(Rec/Ok) button to confirm and progress to the next
(Menu) button.
(Rec/Ok) to
(Rec/Ok)
Advertisement
Table of Contents
