2.7.4 WDR
The WDR setting increases the dynamic range of the camera. To turn this setting on or off, please follow the instructions
below.
1. Press the
(Rec/Ok) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Video Menu .
3. Use the
and
select.
4. Use the
and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.7.5 Motion Detection
Motion Detection is used to pause recording when no motion is detected in front of the camera, and to start recording
when motion is detected again. To activate the Motion Detection setting follow the instructions below.
1. Press the
(Rec/Ok) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Video Menu .
3. Use the
and
(Rec/Ok) to select.
4. Use the
and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
Buttons to navigate the Settings Menu and highlight the WDR setting and press
Buttons to highlight either OFF or ON, then press the
Buttons to navigate the Settings Menu and highlight the Motion Detection setting and press
Buttons to highlight either OFF or ON, then press the
(Rec/Ok) to
(Rec/Ok) button to confirm your selection.
(Rec/Ok) button to confirm your selection.
15