Sequence; Quality - NanoCam Plus NCP-DVR720 User Manual

Hd dash cam dvr with g-sensor

Table of Contents

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.

3.1.3 Sequence

When Sequence is activated, when a photo is triggered a sequence of 3 photos is taken. To activate or deactivate

Sequence mode, follow the instructions below.

1. Enter the Photo screen.

2. Press the

3. Use the

select.

4. Use the

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.

Quality sets the image detail. Higher quality images will capture more detail and will also produce larger files. To change the

recording resolution, please follow the instructions below.

1. Enter the Photo screen.

2. Press the

3. Use the

select.

4. Use the

selection.

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.

(Menu) Button to enter the Photo Menu .

and

Buttons to navigate the Photo Menu and highlight Sequence setting and press

and

Buttons to highlight OFF or ON, then press the

(Menu) Button to enter the Photo Menu .

and

Buttons to navigate the Photo Menu and highlight the Quality setting and press

and

Buttons to highlight your required quality, then press the

(Rec/Ok) button to confirm your selection.

(Rec/Ok) button to confirm your

(Rec/Ok) to

Table of Contents