Table of Contents
Advertisement
3. Photo Mode
This screen is used to capture still images using your Car DVR. To access the Photo screen ensure that the camera is not recording and
press the
(Mode) button. Photo mode also has a menu which is used to edit the photo settings. This menu can be accessed by
pressing the
(Menu) in the Photo Screen.
3.1 Photo Menu
3.1.1 Capture Mode
Capture mode is used to set a delayed timer. To set a timer delay follow the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
4. Use the
selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.
3.1.2 Resolution
Resolution sets the still image quality. Higher resolution images will capture more detail and will also produce larger files. To
change the photo resolution, please follow the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
select.
4. Use the
selection.
19
(Menu) Button to enter the Photo Menu .
and
Buttons to navigate the Photo Menu and highlight Timer setting and press
and
Buttons to highlight your required timer delay, then press the
(Menu) Button to enter the Photo Menu .
and
Buttons to navigate the Photo Menu and highlight Resolution setting and press
and
Buttons to highlight your required resolution, then press the
(Rec/Ok) to select.
(Rec/Ok) button to confirm your
(Rec/Ok) to
(Rec/Ok) button to confirm your
19
Advertisement
Table of Contents
