Recording Audio; Date Stamp - NanoCam Plus NCP-DVR720 User Manual

Hd dash cam dvr with g-sensor

Table of Contents

2.7.6 Recording Audio

The Recording Audio setting allows you to mute the microphone during recording, or set it to record. To set your recording

preferences, please follow the instructions below.

1. Press the

2. Press the

3. Use the

(Rec/Ok) to select.

4. Use the

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

Date stamp will stamp the current date onto the footage for future reference. To set the date stamp please follow the

instructions below.

1. Press the

2. Press the

3. Use the

Ok) to select.

4. Use the

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. For date stamp to be correct the time and date must be set first. To set the time and date please see section Date/Time (3.2.1).

(Rec/Ok) Button to stop the Car DVR from recording.

(Menu) Button to enter the Video Menu .

Buttons to navigate the Settings Menu and highlight the Recording Audio setting and press

and

Buttons to highlight either OFF or ON, then press the

(Rec/Ok) Button to stop the Car DVR from recording.

(Menu) Button to enter the Video Menu .

and

Buttons to navigate the Settings Menu and highlight the Date Stamp setting and press

and

Buttons to highlight either OFF or ON, then press the

(Rec/Ok) button to confirm your selection.

(Rec/

Table of Contents