Sharpness; White Balance - NanoCam Plus NCP-DVR720 User Manual

Hd dash cam dvr with g-sensor

Table of Contents

3.1.5 Sharpness

Sharpness sets the boldness of the image. Images with a stronger sharpness will create bolder images with stronger

outlines. To change the photo Sharpness, please follow the instructions below.

1. Enter the Photo screen.

2. Press the

3. Use the

to select.

4. Use the

selection.

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.

The White Balance setting is used to manually adjust the settings used to counteract different light conditions. This setting

is set to Auto by default. To change the White Balance setting follow the instructions below.

1. Enter the Photo screen.

2. Press the

3. Use the

Ok) to select.

4. Use the

selection.

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.

(Menu) Button to enter the Photo Menu .

Buttons to navigate the Photo Menu and highlight the Sharpness setting and press

and

Buttons to highlight your required sharpness, then press the

(Menu) Button to enter the Photo Menu .

and

Buttons to navigate the Photo Menu and highlight the White Balance setting and press

and

Buttons to highlight your required setting, then press the

(Rec/Ok)

(Rec/Ok) button to confirm your

(Rec/

Table of Contents