Table of Contents
Advertisement
3. Use the
(Rec/Ok) to select.
4. Use the
selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Selecting the OFF option will create the longest possible clip, in most cases depending on the set resolution and other factors this will be limited to 10MB.
3. To avoid filling the card quickly it is advised to use the 1 or 3 minute options.
2.7.3 Exposure
Exposure is used to manually control the light sensitivity settings. To change the Exposure setting follow the instructions
below.
1. Press the
2. Press the
3. Use the
button to select.
4. Use the
your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
14
and
Buttons to navigate the Settings Menu and highlight the Loop Recording setting and press
and
Buttons to highlight your required Clip Length, then press the
(Rec/Ok) Button to stop the Car DVR from recording.
(Menu) Button to enter the Video Menu .
and
Buttons to navigate the Settings Menu and highlight the Exposure setting and press
Buttons to highlight your required Exposure setting, then press the
and
(Rec/Ok) button to confirm your
(Rec/Ok)
(Rec/Ok) button to confirm
Advertisement
Table of Contents
