Language; Date Stamp; Delayed Shutdown - NanoCam Plus NCP-DVRHD2 User Manual

Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2.8.4 Language

The Language setting is used to select your preferred Language in the menus. To set the systems language follow the
instructions below.
OK
1. Press the Button to stop the Car DVR from recording.
2. Hold the Button for 2 seconds to enter the Settings Menu.
M
3. Use the
and
4. Use the and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2.8.5 Date Stamp

Date stamp will stamp the current date onto the footage for future reference. To set the date stamp please follow the
instructions below.
OK
1. Press the Button to stop the Car DVR from recording.
2. Hold the Button for 2 seconds to enter the Settings Menu.
M
3. Use the
and
select.
OK
4. Use the button turn off and on Date Stamp indicated by the check box
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
3. For instructions on how to set your DVR's internal clock, please see the section named Date (2.8.3).

2.8.6 Delayed Shutdown

The Delayed Shutdown setting is used to set the amount of time the DVR will record after your vehicle is parked. To set the
shutdown delay follow the instructions below.
OK
1. Press the Button to stop the Car DVR from recording.
2. Hold the Button for 2 seconds to enter the Settings Menu.
M
3. Use the and
to select.
4. Use the and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
Buttons to navigate the Settings Menu and highlight the Language setting and press
Buttons to highlight your required language, then press the
Buttons to navigate the Settings Menu and highlight the Date Stamp setting and press
Buttons to navigate the Settings Menu and highlight the Delayed Shutdown setting and press
Buttons to highlight your required delay, then press the
OK
button to confirm your selection.
.
OK
button to confirm your selection.
OK
to select.
OK
to
OK
15