Video Mode; Video Menu; Resolution; Loop Recording - NanoCam Plus NCP-DVR720 User Manual

Hd dash cam dvr with g-sensor

Table of Contents

2.6.4 Video Mode

When the Car DVR is powered up the video screen will start by default. In this screen recording will automatically start and

can be stopped by pressing the

then press the

Resolution sets the video quality. Higher resolution video will capture more detail and will also produce larger files. To

change the recording resolution, please follow the instructions below.

1. Press the

(Rec/Ok) Button to stop the Car DVR from recording.

2. Press the

(Menu) Button to enter the Video Menu .

3. Use the

and

Ok) to select.

4. Use the

and

selection.

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. Higher resolution clips will create larger files which will fill the Micro SD Card faster.

Loop recording allows you to set the duration that the camera will record before creating a new clip. To set the clip length

please follow the instructions below.

1. Press the

(Rec/Ok) Button to stop the Car DVR from recording.

2. Press the

Menu) Button to enter the Video Menu .

(Rec/Ok) Button. To access the Video Menu, ensure that the Car DVR is not recording

(Menu) button.

Buttons to navigate the Settings Menu and highlight the Resolution setting and press

Buttons to highlight your required resolution, then press the

(Rec/

(Rec/Ok) button to confirm your

Table of Contents