Exposure; Quick Review - NanoCam Plus NCP-DVR720 User Manual

Hd dash cam dvr with g-sensor

Table of Contents

3.1.9 Exposure

Exposure is used to manually control the light settings. To change the Exposure setting follow the instructions below

1. Enter the Photo screen.

2. Press the

(Menu) Button to enter the Photo Menu .

3. Use the

and

select.

4. Use the

and

your selection.

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.

Quick review displays the photo on screen for the set amount of time after the photo has been taken. To change the Quick

Review setting follow the instructions below.

1. Enter the Photo screen.

2. Press the

(Menu) Button to enter the Photo Menu .

3. Use the

and

Ok) to select.

4. Use the

and

confirm your selection.

Note:

1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.

Buttons to navigate the Photo Menu and highlight the Exposure setting and press

Buttons to highlight your required Exposure setting, then press the

Buttons to navigate the Photo Menu and highlight the Quick Review setting and press

Buttons to highlight your required image display time setting, then press the

(Rec/Ok) to

(Rec/Ok) button to confirm

(Rec/

(Rec/Ok) button to

Table of Contents