Table of Contents
Advertisement
3.1.7 Colour
The Colour setting is used to set the colour palette. To change the Colour setting follow the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
select.
4. Use the
selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.
3.1.8 ISO
ISO is used to manage how much light is let into the image sensor. Setting a higher ISO will let in more light and blurred
movement and lower ISO will capture less movement and less light. To change the ISO setting follow the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
4. Use the
selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the menu.
22
(Menu) Button to enter the Photo Menu .
Buttons to navigate the Photo Menu and highlight the Colour setting and press
and
and
Buttons to highlight your required colour setting, then press the
(Menu) Button to enter the Photo Menu .
and
Buttons to navigate the Photo Menu and highlight the ISO setting and press
and
Buttons to highlight your required ISO setting, then press the
(Rec/Ok) to
(Rec/Ok) button to confirm your
(Rec/Ok) to select.
(Rec/Ok) button to confirm your
22
Advertisement
Table of Contents
