Table of Contents
Advertisement
2.7.8 Contrast
The Contrast setting is used to control the colour contrast of the Car DVR's photos and videos. To adjust the Contast,
please follow the instructions below.
OK
1. Press the
Button to stop the Car DVR from recording.
2. Hold the
Button for 2 seconds to enter the Settings Menu.
M
3. Use the
and
4. Use the
and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.7.9 Exposure
Exposure is used to manually control the light sensitivity settings. To change the Exposure setting follow the instructions
below.
OK
1. Press the
Button to stop the Car DVR from recording.
2. Hold the
Button for 2 seconds to enter the Settings Menu.
M
3. Use the
and
4. Use the
and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.8.0 Auto Record
Auto Record setting is used to set whether the DVR starts automatically recording when you turn your vehicle on.
OK
1. Press the
Button to stop the Car DVR from recording.
2. Hold the
Button for 2 seconds to enter the Settings Menu.
M
3. Use the
and
select.
4. Use the
and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
Buttons to navigate the Settings Menu and highlight the Contrast setting and press
Buttons to highlight your required setting, then press the
Buttons to navigate the Settings Menu and highlight the Exposure setting and press
Buttons to highlight your required setting, then press the
Buttons to navigate the Settings Menu and highlight the Auto Record setting and press
Buttons to turn off and on Auto Record indicated by the check box
OK
OK
button to confirm your selection.
OK
OK
button to confirm your selection.
to select.
to select.
OK
to
13
Hide quick links:
Advertisement
Table of Contents
