Figure 3: Cage Clamp ® Connections Of 750-495/040-010; Table 5: Legend For Figure "Cage Clamp ® Connections Of 750-495/040-010 - WAGO I/O System 750 XTR 750-495/040-010 Manual

20 Table of Contents
Pos: 37 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/CAGE CLAMP-Anschlüsse - Überschrift 3 @ 6\mod_1256296337770_21.docx @ 43674 @ 3 @ 1
3.2.3 CAGE CLAMP
Pos: 38 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/AI/Anschlüsse 750-0495/040-010 CAGE CLAMP @ 35\mod_1561046063456_21.docx @ 548591 @ @ 1
Twelve CAGE CLAMP
current sensors to be connected, each with a two-wire connection; see also
section "Connecting Devices."
All N connections are connected internally to each other and are used for the
reference potential N. Therefore, all sensors use the same reference potential.
Figure 3: CAGE CLAMP
Table 5: Legend for Figure "CAGE CLAMP
Measureme
nt Channel
1
2
3
–
Pos: 39 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.0.0
750-495/040-010 3-Phase POM 20KV 300A XTR
Connectors
®
connections allow the three voltage sensors and three
®
® Connections of 750-495/040-010
® Connections of 750-495/040-010"
Connection Function
L1 Voltage, phase L1
I1 Current, phase L1
N Reference potential N
L2 Voltage, phase L2
I2 Current, phase L2
N Reference potential N
L3 Voltage, phase L3
I3 Current, phase L3
N Reference potential N
N Reference potential N
WAGO I/O System 750 XTR