Module Configuration Method - Quectel LC29D User Manual

7.1.2.2. Module Configuration Method

Step 1: Connect Type-B USB cables and PC as shown in Figure 23 above.
Step 2: Run the provided driver installer to install the USB driver.
Step 3: Flip the power switch (S101) to the ON position to power on the EVB.
Step 4: View the USB port numbers in the Device Manager, as shown in the figure below.
Step 5: Start the QGNSS and click "Setting" and "Serial Port Configuration". Select "Standard COM
Port (COM4)" for "Port" and "115200" (the LC29D module supports 115200 bps by default) for "Baud
Rate", as shown in the figure below.
LC29D_EVB(0)_User_Guide
Figure 23: EVB and Accessories Assembly-2#
Figure 24: USB Ports-2#
Type-B USB cables
GNSS Module Series
30 / 42