Quectel LC29D User Manual page 32

Step 6: Click the
appears as shown in the figure below. The icon has a blue shadow.
Step 7: Use the QGNSS tool to connect to the AT port ("COM10") as shown in the figure below. The
baud rate of the AT port is 115200 bps. Connect the module as shown in Figure 26 above.
LC29D_EVB(0)_User_Guide
Figure 25: QGNSS Setting-2#
"Connect or disconnect" button. After connecting the module, the interface
Figure 26: QGNSS Interface (Connected)-2#
GNSS Module Series
31 / 42