Quectel LC29D User Manual page 23

Step 3: Select the number of tests from 1, 10, 20, 100, 1000, and User Defined. Click the "Run" button
to start the test. Click the "Stop" button to stop the test. Click the "Clear + Stop" button to clear
the data and stop the test.
Step 4: If you select hot start, it is recommended to set the "TTFF Timeout (seconds)" to 10 s. If you
select warm start, you can set the "TTFF Timeout (seconds)" to 50 s. Or, if you select cold start,
you can set the "TTFF Timeout (seconds)" to 100 s. "TTFF Timeout (seconds)" can help you
to assess TTFF and save time.
LC29D_EVB(0)_User_Guide
Figure 11: The Number of Testing
Figure 12: Set TTFF Timeout (Seconds)
GNSS Module Series
22 / 42