Get Rtcm Data Through Eg25-G Module; Hardware Link Connection - Quectel LC29D User Manual

Table 6: NTRIP Client Parameter
Content
Address
Port
Username
Password
Source
NTRIP mount point
⚫
NOTE
When using the QGNSS tool to configure RTK, the PC side maintains a network connection.

7.1.2. Get RTCM Data through EG25-G Module

7.1.2.1. Hardware Link Connection

The connection between EVB and PC is shown in the figure below. Place S203 in the RTK position and
insert SD card into J202 and (U)SIM into J404. For more information about how to connect the EVB and
its accessories, see Chapter 2.2.
LC29D_EVB(0)_User_Guide
Description
Server IP address
Server port
User name
Password
Mount point
NTRIP mount point
GNSS Module Series
29 / 42