Table of Contents
Advertisement
Step 5: Start the QGNSS and click "Setting" and "Serial Port Configuration". Select "Enhanced COM
Port (COM5)" for "Port" and "115200" (the LC29D module supports 115200 bps by default) for "Baud
Rate", as shown in the figure below.
Step 6: Click the
appears as shown in the figure below. The icon has a blue shadow.
LC29D_EVB(0)_User_Guide
Figure 19: QGNSS Setting-1#
"Connect or disconnect" button. After connecting the module, the interface
Figure 20: QGNSS Interface (Connected)-1#
GNSS Module Series
27 / 42
Advertisement
Table of Contents
