GNSS Module Series
5
Using QGNSS Tool to Test
This chapter explains how to use the QGNSS tool for checking the status of GNSS receivers when you
are working with the EVB. For more details on QGNSS usage, see document [3].
Request the QGNSS tool from our website: www.quectel.com.
5.1. COM Port and Baud Rate Setting
Step 1: Assemble the EVB Accessories.
Step 2: Flip the power switch (S101) to the ON position to power on the EVB.
Step 3: Start the QGNSS and click "Setting" and "Serial Port Configuration" (the LC29D module
supports 115200 bps by default), as shown in the figure below.
Figure 7: QGNSS Setting
LC29D_EVB(0)_User_Guide
18 / 42