Using Qcom Tool To Communicate; Communication Via The Type-B Usb Interface - Quectel LC29D User Manual

4

Using QCOM Tool to Communicate

This chapter illustrates how to use the QCOM tool to communicate with the module via the Type-B USB
interface.
Request the QCOM tool from our website: www.quectel.com.

4.1. Communication via the Type-B USB Interface

Step 1: Connect the EVB and the PC with Type-B USB cables via the Type-B USB interface, as shown
in Figure 2.
Step 2: Flip the power switch (S101) to the ON position to power on the EVB.
Step 3: Run the provided driver installer to install the USB driver.
Step 4: View the USB port numbers in the Device Manager, as shown in Figure 4 below.
Step 5: Install the QCOM tool provided by Quectel. The COM Port Setting interface of QCOM is shown
in Figure 5 below.
Step 6: Select the correct "COM Port" (USB Ports shown in Figure 5 above).
LC29D_EVB(0)_User_Guide
Figure 4: USB Ports
Figure 5: COM Port Setting Interface of QCOM
GNSS Module Series
16 / 42