Rtk Account Configuration Method - Quectel LC29D User Manual

7.1.1.3. RTK Account Configuration Method

Step 1: Open the QGNSS tool. Following Figure 20 above, click the
the RTK account configuration interface.
Step 2: Set RTK account configuration information in the "NTRIP Client" interface.
Step 3: After entering the corresponding configuration information, click "Connect". You can see the text
output is displayed as shown in the figure below: Send GGA to server and Received (570) bytes
from server, which indicate that the RTCM data acquisition is successful.
LC29D_EVB(0)_User_Guide
Figure 21: Configure RTK Account-1#
Figure 22: RTCM Data Acquisition Successful-1#
GNSS Module Series
"NTRIP Client" button to enter
28 / 42