Get Rtcm Data Through Qgnss Tool; Hardware Link Connection; Module Configuration Method - Quectel LC29D User Manual

GNSS Module Series

7.1.1. Get RTCM Data through QGNSS Tool

7.1.1.1. Hardware Link Connection

The connection between EVB and PC is shown in the figure below. Place S203 in the DL position. For
more information about how to connect to the EVB and its accessories, see Chapter 2.2.
Type-B USB cable
Figure 17: EVB and Accessories Assembly-1#

7.1.1.2. Module Configuration Method

Step 1: Connect Type-B USB cables and PC as shown in Figure 17 above.
Step 2: Run the provided driver installer to install the USB driver.
Step 3: Flip the power switch (S101) to the ON position to power on the EVB.
Step 4: View the USB port numbers in the Device Manager, as shown in the figure below.
Figure 18: USB Ports-1#
LC29D_EVB(0)_User_Guide 26 / 42