Table of Contents
Advertisement
7.1.2.3. RTK Account Configuration
RTK account binding is realized by sending commands to the AT port of the EG25-G module. The RTK
account only needs to be configured for the first time unless the account expires or the EG25-G module
upgrades the firmware. The commands format is as follows:
Synopsis:
AT+QGNSSPARAM= 0,0," ip",port,"quectel_usr","quectel_pwd","mount_point",1,1
Table 7: Parameter
Parameter
ProtoMode
DataMode
IP
Port
Usr
Pwd
LC29D_EVB(0)_User_Guide
Figure 27: QGNSS Setting-AT Port
Description
0 (NTIRP protocol); 1 (TCP protocol)
The TCP protocol is valid, 0(Rover Station); 1(Base station)
Server IP address
Server port
User name
Password
GNSS Module Series
32 / 42
Advertisement
Table of Contents
