User Password Menu - Cabletron Systems SmartSTACK ELH100 Installation And User Manual

User Password Menu

The User Password menu is used to display or modify user names and
passwords for the on-board configuration program. There are two user
types, Administrator and Guest. Only the Administrator has write access
for parameters governing the SNMP agent. You should therefore assign
a user name and password to the Administrator as soon as possible, and
store it in a safe place.
Passwords can consist of up to 14 alphanumeric characters and are not
case sensitive. The configuration program will allow a user three attempts
at entering a password before locking the user out by terminating the
current connection. If for some reason your password is lost, or you can
not gain access to the system configuration program, contact your
Cabletron distributor for assistance.
User Type
-------
Administrator:
Guest:
<Ctrl-F> to move forward a character, <Ctrl-B> to move back a character
Selection
Administrator
Guest
46 ELH100-12/24TX User Interface
Figure 3-16. User Password Menu
Display/Change User Names and Passwords
=======================================
User Name Password
-------- --------
admin **************
guest **************
<APPLY>
Enter a user name, 1 to 14 characters
Use <TAB> or cursor keys to move, <ENTER> to select,
Default
name: admin
password: admin
name: guest
password: guest
Password Verify
-----------
**************
**************
<OK> <CANCEL>
Description
Administrator has access privilege of Read/Write
for all screens.
Guest has access privilege of Read Only for all
screens.
ELH100-12/24TX