Table of Contents
Advertisement
Safety
Standards complied with
Ex p control unit APEX, type 07-37A2-2211/*730
Page 14 of 80
Standard
EN IEC 60079-0:2018/AC:2020
IEC 60079-0:2011 Edition: 6.0
ГОСТ 31610.0-2014
EN 60079-2:2014
IEC 60079-2:2007 Edition: 5.0
ГОСТ IEC 60079-2-2011
EN 60079-7:2015/A1:2018
IEC 60079-7:2006 Edition: 4.0
ГОСТ Р МЭК 60079-7-2012
EN 60079-11:2012
IEC 60079-11:2011 Edition: 6.0
ГОСТ 31610.11-2014
EN 60079-18:2015/A1:2017
IEC 60079-18:2014 Edition: 4.0
ГОСТ Р МЭК 60079-18-2012
EN 60079-31:2014
IEC 60079-31:2013 Edition: 2.0
ГОСТ IEC 60079-31-2013
EN 61010-1:2010
IEC 61010-1:2010 Edition 3.0
EN 61000-6-4:2007 + A1:2011
IEC 61000-6-4:2018 Edition 3.0
EN 61000-3-2:2014
IEC 61000-3-2:2018 Edition 5.0
EN 61000-3-3:2013
EN 61000-3-3:2013 +
AMD1:2017 Edition 3.1
EN 61326-1:2013
IEC 61326-1:2012
EN ISO 13849-1:2015
EN ISO 13849-2:2012
DIN EN 62061:2016
IEC 62061:2015
01-37A2-7D0005_MV_Manual_Exp-Control-Unit_2021005_0_en.docx
Designation
Explosive atmospheres – Part 0: General
requirements
Explosive atmospheres - Part 2: Equipment
protection by pressurised enclosure "p"
Explosive atmospheres - Part 7: Equipment
protection by increased safety "e"
Explosive atmospheres - Part 11: Equipment
protection by intrinsic safety "i"
Explosive atmospheres - Part 18: Equipment
protection by cast encapsulation "m"
Explosive atmospheres - Part 31:
Equipment dust ignition protection by enclosure
"t"
Safety requirements for electrical equipment for
measurement, control and laboratory use – Part 1:
General requirements
Electromagnetic compatibility (EMC) –
Part 6-4: Generic standards – Emission standard
for industrial environments
Electromagnetic compatibility (EMC) –
Part 3-2: Limits – Limits for harmonic current
emissions (equipment input current <= 16 A per
phase)
Electromagnetic compatibility (EMC) –
Part 3-3: Limits – Limitations of voltage changes,
voltage fluctuations and flicker in public low-
voltage supply systems for equipment with rated
current <= 16 A per phase, and not subject to
conditional connection
Electrical equipment for measurement, control
and laboratory use – EMC requirements – Part 1:
General requirements
Safety of machinery - Safety-related parts of
control systems - Part 1: General principles for
design
Safety of machinery - Safety-related parts of
control systems - Part 2: Validation
Safety of machinery - Functional safety of safety-
related of electrical, electronic and programmable
electronic control systems
Ex p Control unit
APEX
mv
Rev. 0
Advertisement
Table of Contents
