Table of Contents
Advertisement
Safety
2.9 Standards complied with
Ex p control unit APEX, type 07-37A2-2211/*M5*
Page 16 of 96
Standard
EN IEC 60079-0:2018/AC:2020
IEC 60079-0:2011 Edition: 6.0
ГОСТ 31610.0-2014
EN 60079-2:2014
IEC 60079-2:2007 Edition: 5.0
ГОСТ IEC 60079-2-2011
EN 60079-7:2015/A1:2018
IEC 60079-7:2006 Edition: 4.0
ГОСТ Р МЭК 60079-7-2012
EN 60079-11:2012
IEC 60079-11:2011 Edition: 6.0
ГОСТ 31610.11-2014
EN 60079-18:2015/A1:2017
IEC 60079-18:2014 Edition: 4.0
ГОСТ Р МЭК 60079-18-2012
EN 60079-31:2014
IEC 60079-31:2013 Edition: 2.0
ГОСТ IEC 60079-31-2013
EN 61010-1:2010
IEC 61010-1:2010 Edition 3.0
EN 61000-6-4:2007 + A1:2011
IEC 61000-6-4:2018 Edition 3.0
EN 61000-3-2:2014
IEC 61000-3-2:2018 Edition 5.0
EN 61000-3-3:2013
EN 61000-3-3:2013 +
AMD1:2017 Edition 3.1
EN 61326-1:2013
IEC 61326-1:2012
EN ISO 13849-1:2015
EN ISO 13849-2:2012
DIN EN 62061:2016
IEC 62061:2015
01-37A2-7D0003_Operating instructions_MPC_20210923_0_en.docx
Description
Hazardous areas – Part 0: General provisions
Explosive atmosphere – Part 2: Equipment
protection through pressurised enclosure "p"
Explosive atmosphere – Part 7: Equipment
protection through increased safety "e"
Explosive atmosphere – Part 11: Equipment
protection through intrinsic safety "i"
Hazardous areas – Part 18: Equipment protection
through encapsulation "m"
Hazardous areas – Part 31: Device dust explosion
protection through housing "t"
Safety regulations for electrical measuring,
control, regulating and laboratory devices – Part
1: General requirements
Electromagnetic compatibility (EMC) – Part 6-4:
Generic standards – emitted interference for
industrial areas
Electromagnetic compatibility (EMC) – Part 3-2:
Limit values – limit values for harmonic currents
(device input current <= 16 A per conductor)
Electromagnetic compatibility (EMC) -
Part 3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public low-
voltage supply networks for devices with a rated
current <= 16 A per conductor that are not subject
to any special connection conditions
Electrical measuring, control, regulating and
laboratory devices - EMC requirements - Part 1:
General requirements
Safety of machines - Safety-related parts of
control systems - Part 1: General design principles
Safety of machines - Safety-related parts of
control systems - Part 2: Validation
Machine safety - functional safety of safety-
related electrical, electronic and programmable
electronic control systems
Ex p control unit
Motor Purge Controller
Rev. 0
Advertisement
Table of Contents
