Bartec APEXmv 07-37A2-2211 730 Series Operating Instructions Manual page 45

Ex p Control unit
Operation
APEX mv
Procedure:
Open the network settings for the LAN interface on
the PC/laptop.
Select the properties of the LAN connection by
pressing the "Properties" button.
Open the network adapter settings using the
"Configure..." button and select Advanced.
Select the "Speed & Duplex" function in the left-
hand "Property" box
Set the value in the right-hand "Value" box to "100
Mb Full Duplex" by clicking and selecting this in the
drop-down menu
Confirm changes by clicking "OK".
Call up Internet Protocol Version 4 (TCP/IP4) with a
double-click
Properties of internet protocol Version 4 (TCP/IPv4):
Click to change "Obtain IP address automatically" to
"Use following IP address".
Enter IP address 192.168.11.99 for the "IP address"
Enter subnet mask 255.255.0.0.
Confirm entries with OK.
Page 44 of 80 01-37A2-7D0005_MV_Manual_Exp-Control-Unit_2021005_0_en.docx Rev. 0