Marking And Test Certificate; Ex P Control Unit Silas, Type A7-37S2-2111/*520; Standards Complied With - Bartec SILASPZ Manual

Safety

Marking and test certificate

Ex p control unit SILAS, type A7-37S2-2111/*520

Standards complied with

Ex p control unit SILAS, type A7-37S2-2111/*520
Page 14 of 88
The Ex p control unit is approved for the following areas.
ATEX (Europe)
Marking
Test certificate
IECEx (International)
Marking
Test certificate
EAC (Eurasian Economic Union)
Marking
Test certificate
Standard
EN IEC 60079-0:2018/AC:2020
IEC 60079-0:2011 Edition: 6.0
ГОСТ 31610.0-2014
EN 60079-2:2014
IEC 60079-2:2007 Edition: 5.0
ГОСТ IEC 60079-2-2011
EN 60079-7:2015/A1:2018
IEC 60079-7:2006 Edition: 4.0
ГОСТ Р МЭК 60079-7-2012
EN 60079-11:2012
IEC 60079-11:2011 Edition: 6.0
ГОСТ 31610.11-2014
EN 60079-18:2015/A1:2017
IEC 60079-18:2014 Edition: 4.0
ГОСТ Р МЭК 60079-18-2012
A1-37S2-7D0001_pz_Manual_Exp-Control-Unit_20210923_0_en.docx
II 3G Ex ec mc ic [ic pzc] IIC T5/T4 Gb
II 3D Ex tc [ic pzc] IIIC T130 °C / T95 °C Db
BVS 19 ATEX E 016 X
Ex ec mc ic [ic pzc] IIC T5/T4 Gb
Ex tc [ic pzc] IIIC T130 °C / T95 °C Db
IECEx BVS 19.0038X
2Ex ic e mc [ic pz] [ia Ga] IIC T5 Gc X
2Ex ic e mc [ic pz] [ia Ga] IIC T4 Gb X
Ex tc [ic pz] IIIC T95 °C Dc X
Ex tc [ib pz] IIIC T130 °C Dc X
ЕАЭС RU С-DE.АЖ58.В.01809/21
Designation
Explosive atmospheres – Part 0: General
requirements
Explosive atmospheres - Part 2: Equipment
protection by pressurised enclosure "p"
Explosive atmospheres - Part 7: Equipment
protection by increased safety "e"
Explosive atmospheres - Part 11: Equipment
protection by intrinsic safety "i"
Explosive atmospheres - Part 18: Equipment
protection by cast encapsulation "m"
Ex p Control unit
SILAS pz
Rev. 0