Cabletron Systems SmartSTACK 100 User Manual page 75

To display all MAC addresses, at the LCM prompt:
1. Type
addresses display any
LCM responds with a list of all MAC addresses, their
associated ports, the type, age, and number of frames from and
to that address.
Address
08:00:20:02:3a:44 Learned
Enter <CR> to continue, Ctrl-C to exit:
If you do not specify
To display a specific address, at the LCM prompt:
1. Type
addresses display <MAC-ADDRESS>
For example, if you typed,
02:04:06:03:2a:43
information:
Address
02:04:06:03:2a:43
You can display a range of addresses by using a net mask. This is
helpful when determining the status associated with stations
containing the same make of Ethernet network interface cards. At
the LCM prompt:
1. Type
addresses display <MAC-ADDRESS> <NET-MASK>
For example, to see all addresses that begin with 02:04:06, you
would enter:
addresses display 02:04:06:00:00:00 ff:ff:ff:00:00:00
Monitoring and Managing Your ELS100-16TX
Type Port
3
, only the learned addresses are displayed.
any
addresses display
, LCM would display the following
Type Port
Learned 5
Age(secs)
26
Age(secs)
21
4-7