Disabling Bridging; Displaying Bridging Functions - Cabletron Systems SmartSTACK 100 User Manual

Configuring Your ELS100-16TX
Using LCM to enable bridging for a port or port range, at the LCM
prompt:
1. Type
bridge [PORT-RANGE [{off|on|noBPDU}]]
For example,
LCM responds:

3.3 DISABLING BRIDGING

To turn off the bridging function for a port or port range, at the
LCM prompt:
1. Type
bridge [PORT-RANGE] off
For example,
LCM responds:

3.4 DISPLAYING BRIDGING FUNCTIONS

To display the bridging functions that are enabled for all ports, at
the LCM prompt:
1. Type
bridge
LCM responds with a list of all ports and the bridging function
that is enabled. For example, typing
bridging status for all ports.
3-6
bridge 2 on
Port 2 bridging: Transparent Bridging
bridge 2 off
Port 2 bridging: Off
would enable bridging on port 2.
would disable bridging on port 2.
bridge
would display the