Pic.124 Ready For Firm-Ware Upgrade; Pic.125 Firm-Ware Manual Upgrade - idp Smart Series User Manual

4.3.1. Card Printer Firm-ware Upgrade.
If you click "Browse" and select the new firmware, "Manual Update" and "Update" are activated. At that
time, click "Update" button to upgrade automatically, then the printer is upgraded after rebooting.
(Caution: Please do not close upgrade dialog box until it is completed successfully and do not turn off
the printer.)
In case there are some problems in the automatic upgrade, you click "Manual Update" and can see the
pop-up widow as below picture. It shows procedure of manual upgrade. You can upgrade manually
according to this procedure.

Pic.124 Ready for firm-ware upgrade

Pic.125 Firm-ware manual upgrade

71