4.1.2. Card Printer
4
.1.2.1. Basic Setup
①
③
④
⑤
⑩
① To show connected printers
Device: You can select a printer using pull-down menu. "IDP SMART-50 Card Printer" is a
name of printer. "SMART228" is printer ID, "USB001" is connected port.
② To set administrator password and user password.
Change Root PW: To set administrator (root) password. This password is used to verify
user authority for CardPrinterSetup and User Authentication. Also it is required for User
password management.
Change User PW: To set user password for User Authentication.
③ Click "Card Printer" tap.(If laminator is installed, you can setup laminator setting value by
"Laminator" tap.
④ To show firmware version, serial number of printer and serial number, resistor & type of print
head.
⑤ To show print area. It shows exaggeratingly for user convenience.
Pic.111 CardPrinterSetup – Card Printer Basic Setup
(Please set password for security use.)
⑥
⑦
⑧
55
②
⑨