idp Smart Series User Manual page 69

#define SMSC_M_ROTATORBOTTOM
#define SMSC_S_HOPPERHASCARD
#define SMSC_S_THUP
#define SMSC_S_CARDIN
#define SMSC_S_CARDOUT
#define SMSC_S_ROTATORTOP
#define SMSC_S_EQUIPROTATOR
#define SMSC_M_RECVPRINTDATA
#define SMSC_S_HASPRINTBUFFER
#define SMSC_M_SBSRUNNING
#define SMSC_S_SBSMODE
#define SMSC_S_CASEOPEN
#define SMSC_M_INIT
#define SMSC_S_TESTMODE
From card printer firm-ware version 1.00.60 , some values are changed like bellows from black color
texts to red color texts.
#define SMSC_S_THUP
#define SMSC_S_CLEANWARNING
#define SMSC_S_ROTATORTOP
#define SMSC_S_EQUIPLAMINATOR
Error Code
#define SMSC_F_CARDIN
#define SMSC_F_MOVETOPRINT
#define SMSC_F_CARDOUT
#define SMSC_F_MOVETOMAG
#define SMSC_F_MOVETOIC
#define SMSC_F_MOVETORF
#define SMSC_F_MOVETOROTATOR
#define SMSC_F_MOVEFROMROTATOR 0x0000008000000000
#define SMSC_F_THUP
#define SMSC_F_THDOWN
#define SMSC_F_ICHUP
#define SMSC_F_ICHDOWN
#define SMSC_F_ROTATORTOP
#define SMSC_F_ROTATORBOTTOM
#define SMSC_F_PRINT
#define SMSC_F_MAGRW
#define SMSC_E_SEEKRIBBON
#define SMSC_E_MOVERIBBON
#define SMSC_E_NOTH
#define SMSC_E_THOVERHEAT
#define SMSC_E_EMPTYRIBBON
#define SMSC_F_DATA
#define SMSC_F_CARDBACKOUT
#define SMSC_F_CARDERASE
#define SMSC_F_INCORRECT_PW
#define SMSC_F_MAGREADT1
#define SMSC_F_MAGREADT2
#define SMSC_F_MAGREADT3
#define SMSC_F_LOCKED
#define SMSC_F_SPOOLFULL
#define SMSC_F_SET
Laminator's Status Code
#define LMSC_M_HEATHDRLIFTUP
#define LMSC_M_HEATHDRLIFTDOWN
#define LMSC_M_CARDIN
#define LMSC_M_MOVE_LAMINATE
#define LMSC_M_FRONTCARDOUT
#define LMSC_M_REARCARDOUT
#define LMSC_M_ROTATE
#define LMSC_S_WAIT
#define LMSC_S_CMDRUN
#define LMSC_M_HEATING
#define LMSC_S_CASEOPEN
#define LMSC_M_LAMINATING
#define LMSC_S_CARDINSENSOR
0x0000000000020000
0x0000000000040000
0x0000000000080000
0x0000000000100000
0x0000000000200000
0x0000000000400000
0x0000000000800000
0x0000000001000000
0x0000000002000000
0x0000000004000000
0x0000000008000000
0x0000000010000000
0x0000000020000000
0x0000000080000000
0x0000000000080000
0x0000000000080000
0x0000000000400000
0x0000000000400000
0x0000000100000000
0x0000000200000000
0x0000000400000000
0x0000000800000000
0x0000001000000000
0x0000002000000000
0x0000004000000000
0x0000010000000000
0x0000020000000000
0x0000040000000000
0x0000080000000000
0x0000100000000000
0x0000200000000000
0x0000400000000000
0x0000800000000000
0x0001000000000000
0x0002000000000000
0x0004000000000000
0x0008000000000000
0x0010000000000000
0x0020000000000000
0x0040000000000000
0x0080000000000000
0x0100000000000000
0x0200000000000000
0x0400000000000000
0x0800000000000000
0x1000000000000000
0x2000000000000000
0x4000000000000000
0x0000000000000001
0x0000000000000004
0x0000000000000010
0x0000000000000040
0x0000000000000100
0x0000000000000200
0x0000000000000400
0x0000000000000800
0x0000000000002000
0x0000000000004000
0x0000000000008000
0x0000000000010000
0x0000000020000000
69
// Rotate Card down
// Card in hopper
// Thermal head up
// Detect Card in
// Detect Card out
// Card front side up in Flipper
// Flipper installed
// Importing print buffer
// Reserving print buffer
// Executing SBS Commands
// SBS mode
// Case open
// Initializing
// Test mode
// Thermal head up status
// Need cleaning of printer
// Front card up status in rotator
// Laminator is installed
// Error Card in
// Card move Error
// Card out Error
// Card move Error (Magnetic)
// Card move Error (Contact)
// Card move Error (Contactless)
// Card move Error (Printer to Flipper)
// Card move Error (Flipper to Printer)
// Thermal head up Error
// Thermal head down Error
// Contact head up Error
// Contact head down Error
// Card rotate up Error
// Card rotate down Error
// Printing Error
// Magnetic data Read/Write Error
// Ribbon search Error
// Ribbon move Error
// Uninstalled Thermal head
// Overheat Thermal head
// No Ribbon
// Data Error
// Card out to back Error
// Cannot Remove data
// Incorrect Password
// Read data Error Mag. Track.1
// Read data Error Mag. Track.2
// Read data Error Mag. Track.3
// Device Locked
// Exceed Printer Spool
// Recent motion fail
// Heat-header is being lifted up
// Heat-header is being lifted down
// Card In
// Moving to laminate position
// Card is being moved out to front.
// Card is being moved out to rear.
// Rotating
// Waiting
// Command is being executed.
// Heating Heat-header
// Top cover is opened
// Laminating
// Caught by card in sensor