Pic.85 Dynamic Ip Configuration; Pic.86 Static Ip Configuration - idp Smart Series User Manual

Pic.85 Dynamic IP configuration

Pic.86 Static IP configuration

If you setup network automatically,
please choose DHCP.
 Please
select
Configuration".
 "DHCP" is default for SMART-50 printer.
 DHCP server should be in local network to use
DHCP function.
 Static IP is recommended. DHCP server
assigns IP address automatically but this IP
address is temporary, so the IP address may be
changed. In this case, the network error may
occur in connecting to SMART-50 network
printer.
Please select "Static" for Static IP
configuration.

Please enter values for "IP", "Network Mask",
and "Gateway". Click "Set Configuration".

Please check IP address properly which does
not conflict with other devices.
 If you are not aware of static IP, please ask
network administrator for Static IP.

We recommend using Static IP because it is
more stable for using SMART-50 network
printer.
40
DHCP and click "Set