Headlight; Replacing A Front Turn Signal - Yamaha EGO GEAR Owner's Manual

Headlight

This model is equipped with an LED-
type headlight.
If a headlight does not come on, have
a Yamaha dealer check its electrical
circuit.
NOTICE
Do not af x any type of tinted lm or
stickers to the headlight lens.
Periodic maintenance and adjustment
EAU62850
Replacing a turn signal light
bulb or auxiliary light bulb
If a turn signal light bulb or auxiliary
light bulb does not come on, follow
the prcedures as follow.
ECA16581

Replacing a front turn signal

light bulb
1. Place the vehicle on the centerstand.
2. Remove panel A and B (see page
8-9)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb socket
4. Remove the burnt-out bulb by
pulling it out.
5. Insert a new bulb into the socket.
NOTICE
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light ashing may be
affected.
6. Install the socket (together with
7. Install the panel.
Replacing an auxiliary light
bulb
1. Remove panel A and B. (See page
2. Remove the auxiliary light socket
8-31
the bulb) by turning it clockwise.
8-9.)
(together with the bulb) by pulling
it out.
1. Auxiliary light bulb socket
ECAU0081
8