Removing And Installing The Panels - Yamaha EGO GEAR Owner's Manual

Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
1. Panel A
2. Panel B (with headlight)
3 Panel C
4. Panel D
5 Panel E
Periodic maintenance and adjustment
EAU18773
Panel A
To remove the panel
Remove screws and panel A.
pull out the panel.
1. Fuel tank cap lid
2. Panel A
To install the panel
1. Place the panel in the original po-
sition, and then install the screws.
1. Panel A
2. Cowling
3 Hole
2. Place the panel and install the
Panel B (with head light)
To remove the panel
1. Remove panel A.
2. Remove the screws, quick fasten-
8-9
screw.
er screws and bolts, and then pull
the panel B (with head light) until it
is remove.
8