Replacing The Fuse - Yamaha EGO GEAR Owner's Manual

Periodic maintenance and adjustment

Replacing the fuse

1. Fuse
The fuse holder is located behind panel
A. (See page 8-9.)
If the fuse is blown, replace it as fol-
lows.
8
1. Turn the key to "OFF" and turn off
all electrical circuits.
2. Remove the blown fuse, and then
install a new fuse of the speci ed
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a re.
[EWA15132]
EAU23505
1. Backup fuse
2. Main fuse
3. Headlight fuse
4. Signaling system fuse
5. Ignition fuse
6. Terminal fuse 1 (for power outlet)
7. Spare fuse
Speci ed fuses:
Main fuse:
20.0 A
Headlight fuse:
7.5 A
Signaling system fuse:
7.5 A
Ignition fuse:
7.5 A
Terminal fuse 1:
5.0 A
Backup fuse:
7.5 A
3. Turn the key to "ON" and turn on
4. If the fuse immediately blows
8-30
the electrical circuits to check if
the devices operate.
again, have a Yamaha dealer
check the electrical system.