Helmet Holders - Yamaha EGO GEAR Owner's Manual

Instrument and control functions
2. Remove the key from the main
switch if the scooter will be left un-
attended.
TIP
Make sure that the seat is properly se-
cured before riding.
5

Helmet holders

1. Helmet holder
The helmet holders are located under
the seat.
To secure a helmet to a helmet hold-
er
1. Open the seat. (See page 5-11.)
2. Attach a helmet to a helmet hold-
er, and then securely close the
seat. WARNING! Never ride with
a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
To release a helmet from a helmet
holder
Open the seat, remove the helmet from
the helmet holder, and then close the
seat.
5-12
EAU37482
Storage compartment
1. Storage compartment
WARNING
Do not exceed the load limit of 5
kg for the convenience hook.
Do not exceed the maximum load
of 154 kg for the scooter.
NOTICE
Keep the following points in mind
[EWA10162]
when using the storage compart-
ment.
EAUN1200
EWAN0030
ECA21150