Yamaha EGO GEAR Owner's Manual page 53

Periodic maintenance and adjustment
1. Panel B (with headlight)
2. Screw
3. Bolt
4. Quick fastener
To install the panel
8
1. Place the panel in the original po-
sition, and x the cowling to the
panel and the hole.
1. Panel B (with headlight)
2. Cowling
3. Hole
2. Install the screw, bolt and quick
fastener to the panel.
3. Install panel A.
Panel C
To remove the panel
1. Open the seat (see page 5-11)
2. Remove the screw from panel C,
and pull out the panel.
8-10
1. Panel C
2. Screw
To install the panel
1. Place the panel in the original po-
sition, and install the bolts.
2. Close the seat.
Panel D
To remove the panel
1. Open the seat (see page 5-11)
2. Remove the screw from panel D,
and pull out the panel.