Checking The V-Belt; Checking And Lubricating The Cables; Throttle Grip And Cable - Yamaha EGO GEAR Owner's Manual

Checking the V-belt

The V-belt must be checked and re-
placed by a Yamaha dealer at the inter-
vals speci ed in the
maintenance and lubrication chart.
EAUU0311
Checking and lubricating the
cables
The operation of all control cables and
periodic
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubri-
cated if necessary. If a cable is
damaged or does not move smoothly,
have a Yamaha dealer check or re-
place it. WARNING! Damage to the
outer housing of cables may result
in internal rusting and cause inter-
ference with cable movement. Re-
place damaged cables as soon as
possible to prevent unsafe condi-
tions.
[EWA10712]
Periodic maintenance and adjustment
EAU23098
8-25
Checking and lubricating the

throttle grip and cable

The operation of the throttle grip
should be checked before each ride. In
addition, the cable should be lubricat-
ed by a Yamaha dealer at the intervals
speci ed in the periodic maintenance
chart.
EAU49921
8