Yamaha EGO GEAR Owner's Manual page 23

Instrument and control functions
Take precautions to prevent the
waterproof seal from being
damaged or contaminated by
dirt.
Do not touch the internal cir-
cuits and terminals. This may
cause malfunctions.
Do not apply excessive force to
the smart key when replacing
the battery.
5
Make sure the battery is in-
stalled correctly. Con rm the di-
rection of the positive/"+" side
of the battery.
To replace the battery
1. Open the smart key case as
shown.
2. Remove the battery.
1. Battery
TIP
Dispose of the removed battery in ac-
cordance with local regulations.
3. Install a new battery as shown.
Note the polarity of the battery.
Speci ed battery:
CR2032
5-2
1. Battery
4. Slowly, snap the remote casing
until is locked.