Final Transmission Oil - Yamaha EGO GEAR Owner's Manual

Table of Contents

Advertisement

NOTICE
• Be sure no foreign material en-
ters the crankcase.
7. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
8. Turn the engine off, and then
check the oil level and correct it if
necessary.
Periodic maintenance and adjustment
ECA11671

Final transmission oil

The nal transmission case must be
checked for oil leakage before each
ride. If any leakage is found, have a
Yamaha dealer check and repair your
motorcycle. In addition, the nal trans-
mission oil must be changed as follows
at the intervals speci ed in the periodic
maintenance and lubrication chart.
1. Start the engine and warm up the
nal transmission oil by riding the
motorcycle for several minutes.
2. Stop the engine and then place
the motorcycle on the center-
stand.
3. Place an oil pan under the nal
transmission case to collect the
used oil.
4. Remove the nal transmission oil
ller cap and its O-ring from the -
nal transmission case.
EAU67820
1. Final transmission oil ller cap
2. O-ring
5. Remove the nal transmission oil
1. Final transmission oil drain bolt
2. Gasket
8-15
drain bolt and its gasket to drain
the oil from the nal transmission
case.
1
2
1
2
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents