Yamaha EGO GEAR Owner's Manual page 54

1. Panel D
To install the panel
1. Place the panel in the original po-
sition, and install the bolts.
2. Close the seat.
Panel E
To remove the panel
1. Remove panel C and D.
2. Remove the screw from panel E,
and pull out the panel.
Periodic maintenance and adjustment
1. Panel E
2. Screw
To install the panel
1. Place the panel in the original po-
sition, and x the cowling to the
panel and the hole.
1. Panel E
2. Cowling
3. Hole
8-11
2. Install the screw to the panel.
3. Install panel C and D.
8