Replacing The Headlight Bulb - Yamaha XT250 2021 Owner's Manual

Specified fuses:
Main fuse:
30.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Headlight fuse:
15.0 A
Fuel injection system fuse:
10.0 A
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Periodic maintenance and adjustment

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE

Do not touch the glass part of
the headlight bulb. Otherwise
the luminosity and the life of the
bulb may be adversely affected.

Thoroughly clean off any dirt,
oil, or fingerprints from the bulb
using a cloth moistened with al-
cohol or thinner.

Do not use a headlight bulb of a
wattage higher than specified.

Do not affix any type of tinted
film or stickers to the headlight
lens.
7-34
EAU23818
ECA26690
1. Do not touch the glass part of the bulb.
1. Remove cowling
page 7-9.)
2. Remove the headlight unit by re-
moving the bolts.
1. Bolt
3. Disconnect the headlight coupler,
and then remove the headlight
1
2
3
4
5
A. (See
6
7
8
9
1
10
11
12