After Replacing The Fuse; When The Circuit From The Battery Is Overloaded; To Prevent Car Breakdowns And Vehicle Fires; Before Replacing The Fuse - Toyota Vitz Manual

knowledge
■
After replacing the fuse
●
If the lights do not turn on after replacement, replace the bulb. (P. 270)
●
If the fuse blows again after replacement, have a Toyota dealer check it.
■
When the circuit from the battery is overloaded
It is designed to blow the fuse before the wiring is damaged.
■
When replacing the light bulb (bulb)
We recommend using the genuine Toyota products specified for this vehicle. Since some light bulbs are
connected to a dedicated circuit that prevents overcurrent, you may not be able to use other than
genuine Toyota products specified by this vehicle.
warning
■
To prevent car breakdowns and vehicle fires
Please observe the following.
If you do not observe it, you may break down the car, catch fire, or get injured.
●
Do not use a fuse with a capacity other than the specified capacity or a fuse other than the specified capacity.
●
Be sure to use a genuine Toyota fuse or an equivalent product.
●
Do not modify the fuse or fuse box.
caution
■
Before replacing the fuse
If you find that the cause of the blown fuse is an overload of electricity, have a
Toyota dealer check it.
4‑2. Simple inspection / parts replacement
289
Four
Oh
hand
Enter
NS
of
death
mosquito
rice field