Toyota Venza 2021 Manual
Hide thumbs Also See for Venza 2021:
Table of Contents

Advertisement

Quick Links

Pictorial index
For safety
and security
Vehicle status
information and
indicators
Before driving
Driving
Interior features
Maintenance
and care
When trouble
arises
Vehicle
specifications
For owners
Index
VENZA_OM_OM48K18U_(U)
Search by illustration
Make sure to read through them
(Main topics: Child seat, theft deterrent system)
Reading driving-related information
(Main topics: Meters, multi-information display)
Opening and closing the doors and windows,
adjustment before driving
(Main topics: Keys, doors, seats)
Operations and advice which are necessary for
driving
(Main topics: Starting hybrid system, refueling)
Usage of the interior features
(Main topics: Air conditioner, storage features)
Caring for your vehicle and maintenance
procedures
(Main topics: Interior and exterior, light bulbs)
What to do in case of malfunction and emergency
(Main topics: 12-volt battery discharge, flat tire)
Vehicle specifications, customizable features
(Main topics: Fuel, oil, tire inflation pressure)
Reporting safety defects for U.S. owners, and seat
belt, SRS airbag and headlight aim instructions for
Canadian owners
Search by symptom
Search alphabetically
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents
loading

Summary of Contents for Toyota Venza 2021

  • Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security (Main topics: Child seat, theft deterrent system) Vehicle status Reading driving-related information information and (Main topics: Meters, multi-information display) indicators Opening and closing the doors and windows, Before driving adjustment before driving (Main topics: Keys, doors, seats)
  • Page 2: Table Of Contents

    TABLE OF CONTENTS For your information....Gauges and meters (Vehicles with 4.2-inch display)..87 Reading this manual ....11 How to search......12 Gauges and meters (Vehicles with 7-inch display)..91 Pictorial index ......14 Multi-information display (4.2- For safety and security inch display) ....94 Multi-information display (7- inch display) ....
  • Page 3 Opening the fuel tank cap display) ............Automatic air conditioning 4-5. Using the driving support system (vehicles with 12.3- systems inch display) ....Toyota Safety Sense 2.0229 Heated steering wheel/seat PCS (Pre-Collision System) heaters/seat ventilators331 ........5-2. Using the interior lights LTA (Lane Tracing Assist) Interior lights list ....
  • Page 4 Cleaning the hybrid battery (traction battery) air intake 5-4. Using the other interior fea- vent and filter....tures Wiper insert replacement Toyota multi-operation touch ........(vehicle with the 12.3-inch display)......Electronic key battery ..Panoramic fixed moon roof Checking and replacing fuses with one-touch frosted glass ........
  • Page 5 TABLE OF CONTENTS If the electronic key does not Index operate properly ..If the 12-volt battery is dis- charged ....... What to do if... (Trouble- shooting) ..... If your vehicle overheats Alphabetical Index ..If the vehicle becomes stuck ........
  • Page 6: For Your Information

    However, because of they may have on, your Toyota the Toyota policy of continual vehicle. product improvement, we This vehicle should not be modi-...
  • Page 7 • For use by Toyota in a lawsuit • Engine speed/ Electric motor • For research purposes where the speed (traction motor speed) data is not tied to a specific vehi- •...
  • Page 8  How far (if at all) the driver (U.S.mainland only) was depressing the accelera- tor and/or brake pedal; and, If your Toyota has Safety Con-  How fast the vehicle was trav- nect and if you have subscribed eling. to those services, please refer to...
  • Page 9 • For use by Toyota in a lawsuit WARNING However, if necessary, Toyota ■ General precautions while...
  • Page 10 WARNING ■ General precaution regarding children’s safety Never leave children unattended in the vehicle, and never allow children to have or use the key. Children may be able to start the vehicle or shift the vehicle into neutral. There is also a danger that children may injure them- selves by playing with the side windows, or other features of the...
  • Page 11: Reading This Manual

    Reading this manual Symbols Meanings Indicates the action Explains symbols used in (pushing, turning, etc.) used to operate this manual switches and other devices. Symbols in this manual Indicates the outcome of an operation (e.g. a Symbols Meanings lid opens). WARNING: Explains something that, if not obeyed,...
  • Page 12: How To Search

    Searching by title ■ How to search  Table of contents: P.2 Searching by name ■  Alphabetical index: P.531 Searching by installation ■ position  Pictorial index: P.14 Searching by symptom or ■ sound  What to do if... (Troubleshoot- ing): P.528...
  • Page 14: Pictorial Index

    Pictorial index Pictorial index ■Exterior The shape of the headlights may differ depending on the grade, etc. Side doors ................P.131 Locking/unlocking ..............P.131 Opening/closing the side windows ........P.179 Locking/unlocking by using the mechanical key ....P.467 Warning messages ..............P.453 Back door ................P.136 Locking/unlocking ..............P.137 Opening from inside the cabin ..........P.138 Opening from outside............P.137...
  • Page 15 Pictorial index To prevent freezing (windshield wiper de-icer) ...P.319, 329 Precautions against car wash (Rain-sensing windshield wipers) ........P.371 Replacing the wiper insert ...........P.421 Fuel filler door ..............P.226 Refueling method ..............P.226 Fuel type/fuel tank capacity ..........P.481 Tires ..................P.397 Tire size/inflation pressure ...........P.485 Winter tires/tire chain ............P.306 Checking/rotation/tire pressure warning system ....P.397 Coping with flat tires.............P.457...
  • Page 16 Pictorial index : If equipped...
  • Page 17 Pictorial index ■Instrument panel Power switch ..............P.196 Starting the hybrid system/changing the modes ....P.196 Emergency stop of the hybrid system ........P.435 When the hybrid system will not start ........P.464 Warning messages ..............P.453 Shift lever................P.204 Changing the shift position...........P.205 Precautions against towing ..........P.437 When the shift lever does not move........P.205 Meters ................P.87, 91 Reading the meters/adjusting the instrument panel light...
  • Page 18 Pictorial index Energy monitor..............P.120 When the warning messages are displayed ......P.453 Turn signal lever ..............P.207 Headlight switch ..............P.214 Headlights/parking lights/tail lights/ license plate lights/daytime running lights......P.214 Windshield wiper and washer switch ......P.220 Rear window wiper and washer switch ......P.224 Usage................P.220, 224 Adding washer fluid..............P.393 Warning messages ..............P.453 Emergency flasher switch..........P.434...
  • Page 19 Pictorial index ■Switches Driving position memory switches ........P.159 “ODO TRIP” switch ............P.89, 93 Instrument panel light control switch ......P.90, 94 Automatic High Beam switch ...........P.217 VSC OFF switch ..............P.299 *1, 2 Camera switch Windshield wiper de-icer switch ......P.319, 329 Heated steering wheel switch ........P.331 Power back door switch ............P.138 Window lock switch ............P.181...
  • Page 20 Pictorial index Meter control switches ..........P.95, 105 Vehicle-to-vehicle distance switch........P.262 Cruise control switches Dynamic radar cruise control with full-speed range .....P.256 Audio remote control switches LTA (Lane Tracing Assist) switch ........P.248 Phone switch Talk switch : Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MAN- UAL”.
  • Page 21 Pictorial index Parking brake switch ............P.208 Applying/releasing..............P.208 Precautions against winter season ........P.307 Warning buzzer/message ..........P.448, 453 Brake hold switch ..............P.211 Driving mode select switch..........P.297 EV drive mode switch ............P.202 Front seat heater switches ..........P.331 Front seat ventilator switches .........P.332 : If equipped...
  • Page 22 Pictorial index ■Interior SRS airbags ................P.31 Floor mats................P.24 Front seats................P.155 Rear seats ................P.156 Head restraints ..............P.162 Seat belts ................P.27 Console box ...............P.339 Inside lock buttons ............P.134 Cup holders ................P.339 Assist grips ................P.359...
  • Page 23 Pictorial index ■Ceiling Inside rear view mirror ............P.165 Digital Rear-view Mirror ..........P.166 Sun visors................P.349 Vanity mirrors..............P.349 Interior lights ..............P.335 Personal lights ..............P.336 Dimming switch ...............P.347 Electronic sunshade switch ...........P.347 “SOS” button ..............P.63 Garage door opener switches ........P.361 : If equipped : The illustration shows the front, but they are also equipped in the rear.
  • Page 24 For safety and security 1-1. For safe use Before driving....24 For safe driving ....25 Seat belts .......27 airbags....31 Front passenger occupant classification system ..41 Exhaust gas precautions 1-2. Child safety Riding with children ..47 Child restraint systems... 1-3. Emergency assistance Safety Connect ....63 1-4.
  • Page 25: For Safe Use

    Do not use floor mats designed Insert the retaining hooks for other models or different (clips) into the floor mat eye- model year vehicles, even if lets. they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
  • Page 26: For Safe Driving

    1-1. For safe use For safe driving WARNING ■ Before driving For safe driving, adjust the ● Check that the floor mat is securely fixed in the correct seat and mirror to an appro- place with all the provided priate position before driv- retaining hooks (clips).
  • Page 27 1-1. For safe use properly wear the vehicle’s seat WARNING belt. (P.48) Observe the following precau- tions. Failure to do so may result in Adjusting the mirrors death or serious injury. Make sure that you can see ● Do not adjust the position of the driver’s seat while driving.
  • Page 28: Seat Belts

    Do not use a seat belt for more than one person at once, including chil- dren. ● Toyota recommends that chil- dren be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
  • Page 29 Have tions regarding seat belt usage. any necessary repairs carried (P.27) out by your Toyota dealer. Inap- ■ Seat belt extender propriate handling may lead to incorrect operation. If your seat belts cannot be fastened...
  • Page 30 1-1. For safe use a click sound is heard. WARNING To release the seat belt, ● Do not wear the seat belt press the release button extender if you can fasten the seat belt without the extender. ■ Emergency locking retractor ●...
  • Page 31 ● If the pretensioner has acti- vated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer.
  • Page 32: Srs Airbags

    1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to cer- tain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system Location of the SRS airbags ■...
  • Page 33 1-1. For safe use SRS curtain shield airbags • Can help protect primarily the head of occupants in the outer seats • Can help prevent the occupants from being thrown from the vehicle in the event of vehicle rollover SRS airbag system components ■...
  • Page 34 1-1. For safe use Front passenger occupant classification sensors Knee airbag SRS warning light Airbag sensor assembly Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors etc.
  • Page 35 1-1. For safe use • If the vehicle strikes an object, ■ Conditions under which the such as a parked vehicle or sign SRS airbags may deploy pole, which can move or deform (inflate), other than a collision on impact The SRS front airbags and SRS cur- •...
  • Page 36 When to contact your Toyota ● Collision from the side at an angle dealer In the following cases, the vehicle will require inspection and/or repair. Contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
  • Page 37 1-1. For safe use vehicle was involved in an acci- ● The portion of the front pillars, rear dent that was not severe enough pillars or roof side rail garnishes to cause the SRS side and curtain (padding) containing the SRS cur- shield airbags to inflate.
  • Page 38 1-1. For safe use ● If the seat belt extender has WARNING been connected to the front • Move your seat to the rear as passenger’s seat belt buckle but far as you can while still reach- the seat belt extender has not ing the pedals comfortably.
  • Page 39 Toyota strongly recom- mends that all infants and chil- dren be placed in the rear seats of the vehicle and properly restrained.
  • Page 40 If the areas where the SRS air- bags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. Do not hang coat hangers or ● ●...
  • Page 41 1-1. For safe use WARNING ● Modifications to the front door panel (such as making a hole in ● Repairs or modifications of the front fender, front bumper, or side of the occupant compart- ment ● Installation of a grille guard (bull bars, kangaroo bar, etc.), snow plows, winches or roof luggage carrier...
  • Page 42: Front Passenger Occupant Classification System

    1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and seat cushion airbag in the front passen- ger side.
  • Page 43 Do not kick the front passenger seat or subject it to severe impact. Otherwise, the SRS warning light may come on to indicate a malfunction of the front passenger occupant clas- sification system. In this case, contact your Toyota dealer immediately.
  • Page 44 1-1. For safe use WARNING ● Child restraint systems installed on the rear seat should not con- tact the front seatbacks. ● Do not use a seat accessory, such as a cushion and seat cover, that covers the seat cushion surface. ●...
  • Page 45 1-1. For safe use Child ■ “AIR BAG OFF” “AIR BAG ON” and “AIR BAG OFF” or “AIR BAG indicator lights ON” Indicator/warn- ing light SRS warning light Driver’s and front passenger’s seat or flashing belt reminder light Deactivated or Front passenger airbag activated Devices...
  • Page 46 1-1. For safe use There is a malfunction in the system ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG OFF” indicator lights Indicator/warn- SRS warning light ing light Driver’s and front passenger’s seat belt reminder light Front passenger airbag Devices Deactivated Front passenger seat cushion airbag...
  • Page 47: Exhaust Gas Precautions

    Failure to do so may cause repaired by your Toyota dealer. exhaust gases to enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard.
  • Page 48: Child Safety

    1-2. Child safety Riding with children 1-2.Child safety WARNING ■ When children are in the vehi- Observe the following pre- Never leave children unattended cautions when children are in the vehicle, and never allow in the vehicle. children to have or use the key. Use a child restraint system Children may be able to start the appropriate for the child,...
  • Page 49: Child Restraint Systems

    1-2. Child safety Child restraint sys- Points to remember tems The laws of all 50 states of the U.S.A. as well as Canada now Before installing a child require the use of child restraint restraint system in the vehi- systems. cle, there are precautions ...
  • Page 50 1-2. Child safety WARNING ● Toyota strongly urges the use of a proper child restraint system that conforms to the weight and size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
  • Page 51 1-2. Child safety Child restraint system Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.52 Child restraint LATCH P.57 anchors attachment...
  • Page 52 1-2. Child safety When using a child WARNING restraint system ■ When using a child restraint system When installing a child ■ Observe the following precau- restraint system to a front tions. Failure to do so may result in passenger seat death or serious injury.
  • Page 53 1-2. Child safety ● When a booster seat is WARNING installed, always ensure that the ● A forward-facing child restraint shoulder belt is positioned system may be installed on the across the center of the child’s front passenger seat only when shoulder.
  • Page 54 1-2. Child safety manual enclosed with the child in lock mode. In lock mode, restraint system. the belt cannot be extended. Rear-facing  Infant ■ seat/convertible seat Adjust the rear seat. If there is a gap between the child restraint system and the seatback, adjust the seatback angle until good contact is achieved.
  • Page 55 1-2. Child safety buckle. Make sure that the When using the rear seat: If there is a gap between the child restraint belt is not twisted. system and the seatback, adjust the seatback angle until good con- tact is achieved. If the head restraint interferes with the child restraint system installation and the head...
  • Page 56 1-2. Child safety removed, remove the head check that it cannot be extended. restraint. (P.163) If the child restraint has a top tether strap, follow the child Place the child restraint sys- restraint manufacturer’s tem on the seat facing the operation manual regarding front of the vehicle.
  • Page 57 1-2. Child safety buckle. Make sure that the WARNING belt is not twisted. ■ When installing a child Check that the shoulder belt is cor- restraint system rectly positioned over the child’s Observe the following precau- shoulder and that the lap belt is as tions.
  • Page 58 1-2. Child safety Child restraint system WARNING fixed with a child restraint ● When securing some types of child restraint systems in rear LATCH anchor seats, it may not be possible to properly use the seat belts in Child restraint LATCH ■...
  • Page 59 1-2. Child safety remove the head restraint. With rigid lower attachments  (P.163) Latch the buckles onto the LATCH anchors. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower con- nector system. With flexible lower attach- ...
  • Page 60 1-2. Child safety When installing in the rear ■ ● Follow all installation instruc- center seat tions provided by the child restraint system manufacturer. There are no LATCH anchors ● Never attach two child restraint behind the rear center seat. system attachments to the However, the inboard LATCH same anchor.
  • Page 61 1-2. Child safety Outboard rear seats Outboard rear seats   Remove the head restraint. (P.163) Anchor brackets Top tether strap Latch the hook onto the Center rear seat  anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
  • Page 62 1-2. Child safety restraint system installation, install the head restraint. Hook Top tether strap Center rear seat  Adjust the head restraint to ■ Laws and regulations pertain- ing to anchors the upmost position. The LATCH system conforms to If the head restraint interferes with FMVSS225 or CMVSS210.2.
  • Page 63 1-2. Child safety WARNING ● Center rear seat: When install- ing the child restraint system with the head restraint being raised, after the head restraint has been raised and then the anchor bracket has been fixed, do not lower the head restraint.
  • Page 64: Emergency Assistance

    Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Can- ada. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.
  • Page 65 1-3. Emergency assistance ■ Certification for the Safety Connect Helps drivers receive necessary Services response from emergency service P.66 providers. ( Subscribers have the following : U.S. Patent No. 7,508,298 B2 Safety Connect services avail- able:  Stolen Vehicle Location ...
  • Page 66 A variety of subscription terms Rico and Canada. are available for purchase. Con- ● Automatic Collision Notification, tact your Toyota dealer, call the Emergency Assistance, Stolen Vehicle and Enhanced Road following appropriate Customer Assistance are not available in the Experience Center or push the U.S.
  • Page 67 Automatic Collision Notifi- ■ Further information is available cation at Toyota.com in the United In case of either airbag deploy- States, Toyotapr.com in Puerto ment or severe rear-end colli- Rico and Toyota.ca in Canada. sion, the system is designed to Emergency Assistance But- ■...
  • Page 68 Safety Connect Terms and Those standards were based on Conditions, which are available comprehensive and periodic at Toyota.com in the United evaluations of the relevant sci- States, Toyotapr.com in Puerto entific literature. Over 120 scien- Rico and Toyota.ca in Canada.
  • Page 69: 1-4. Hybrid System

    1-4. Hybrid system Hybrid system features 1-4.Hybrid system Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the characteristics of your vehicle, and operate it with care. The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving condi- tions, improving fuel efficiency and reducing exhaust emis- sions.
  • Page 70 If the hybrid battery (traction D or S. battery) becomes fully discharged and you are unable to start the ■ EV indicator hybrid system, contact your Toyota The EV indicator comes on when dealer.
  • Page 71 Maintenance, repair, recycling, and disposal The gasoline engine may not stop even if the vehicle is being driven by Contact your Toyota dealer regard- the hybrid battery (traction battery). ing maintenance, repair, recycling If this continues for a few days, con- and disposal.
  • Page 72 1-4. Hybrid system be increased according to the Predictive efficient drive driving conditions to more effi- (vehicles with navigation ciently charge the hybrid bat- system) tery (traction battery) after the accelerator pedal is released. : This function can only be used in the mainland U.S.A.
  • Page 73: Hybrid System Precautions

    1-4. Hybrid system Hybrid system precautions Take care when handling the hybrid system, as it is a high voltage system (about 650V at maximum) as well as contains parts that become extremely hot when the hybrid system is operating. Obey the warning labels attached to the vehicle. System components The illustration is an example for explanation and may differ from the actual item.
  • Page 74 1-4. Hybrid system WARNING ■ Running out of fuel ■ High voltage precautions When the vehicle has run out of fuel and the hybrid system cannot be This vehicle has high voltage DC started, refuel the vehicle with at and AC systems as well as a 12- least enough gasoline to make the volt system.
  • Page 75 ● If electrolyte is leaking from the posed vehicle are collected hybrid battery (traction battery), through Toyota dealer. Do not do not approach the vehicle. dispose of the battery yourself. Even in the unlikely event that the hybrid battery (traction bat- ●...
  • Page 76 Do not get water or foreign tery must be disposed of by materials in the air intake vent your Toyota dealer or a qualified as this may cause a short circuit service shop. If the hybrid bat- and damage the hybrid battery tery is not disposed of properly, (traction battery).
  • Page 77 1-4. Hybrid system this case, try to start the system Emergency shut off sys- again. If the “READY” indicator does not come on, contact your Toyota dealer. When a certain level of impact is detected by the impact sensor, the emergency shut off system...
  • Page 78: Theft Deterrent System

    1-5. Theft deterrent system Immobilizer system 1-5.Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type immobilizer system. The vehicle’s keys have built-in transponder chips ■ Conditions that may cause the system to malfunction that prevent the hybrid sys- ●...
  • Page 79: Alarm

    1-5. Theft deterrent system The security indicator changes Alarm from being on to flashing when the system is set. : If equipped If all doors are closed with hood The alarm uses light and open, alarm system can be set. sound to give an alert when an intrusion is detected.
  • Page 80 1-5. Theft deterrent system ● While the alarm is activated, a person remaining in the vehicle unlocks the door. ● When recharging or replacing the 12-volt battery. NOTICE ■ To ensure the system oper- If a door is unlocked using the ates correctly mechanical key while the alarm is Do not modify or remove the sys-...
  • Page 81: Theft Prevention Labels (U.s.a.)

    1-5. Theft deterrent system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. Do not remove under penalty of law.
  • Page 82: Vehicle Status Information And Indicators

    Vehicle status informa- tion and indicators 2-1. Instrument cluster Warning lights and indica- tors .......82 Gauges and meters (Vehi- cles with 4.2-inch display) ........87 Gauges and meters (Vehi- cles with 7-inch display)91 Multi-information display (4.2-inch display)..94 Multi-information display (7- inch display) ....Head-up display ..
  • Page 83: Instrument Cluster

    2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster, overhead console panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. Instrument cluster For the purpose of explanation, the following illustrations display all warning lights and indicators illuminated.
  • Page 84: Tors

    2-1. Instrument cluster The units used on the meters and some indicators may differ depending on the target region. Warning lights ABS warning light (P.444) Warning lights inform the driver (Canada) of malfunctions in the indicated Electric power steer- vehicle’s systems. ing system warning light (P.444)
  • Page 85 (P.448) dent, which could result in death Driver’s and front pas- or serious injury. Have the vehicle senger’s seat belt inspected by your Toyota dealer reminder light immediately if this occurs. (P.449) Rear passengers’ seat belt reminder light (P.449)
  • Page 86 2-1. Instrument cluster Indicators Slip indicator light (P.299) The indicators inform the driver (Flashes) of the operating state of the VSC OFF indicator vehicle’s various systems. (P.300) *5, 7 Turn signal indicator PCS warning light (P.207) (P.235) BSM outside rear view Headlight indicator *7, 8 mirror indicators...
  • Page 87 Have the vehicle inspected by your Toyota dealer. : This light illuminates on the out- side rear view mirrors. : This light illuminates on the over- head console panel.
  • Page 88: Gauges And Meters (Vehicles With 4.2-Inch Display)

    2-1. Instrument cluster Gauges and meters (Vehicles with 4.2-inch dis- play) The meters display various drive information. Meter display The units used on the meter and display may differ depending on the target region. Hybrid System Indicator Displays hybrid system output or regeneration level (P.88) Outside temperature (P.89) Clock The GPS clock’s time is automatically adjusted by utilizing GPS time infor-...
  • Page 89 2-1. Instrument cluster Odometer, trip meter and oil maintenance Odometer: Displays the total distance that the vehicle has been driven Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently.
  • Page 90 Using the “ODO TRIP” etc.) switch ● When “--” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota Switches the items of the odom- dealer. eter, trip meter A, trip meter B ● Displays the outside temperature within the range of -40°F (-40°C)
  • Page 91 2-1. Instrument cluster the tail lights will not change the instrument cluster brightness. Pop-up display ■ Distance until the next engine oil change will be displayed when a warning message indicating that oil maintenance is required or should be performed soon is displayed.
  • Page 92: Gauges And Meters (Vehicles With 7-Inch Display)

    2-1. Instrument cluster Gauges and meters (Vehicles with 7-inch display) The meters display various drive information. Meter display The units used on the meter and display may differ depending on the target region. Hybrid System Indicator Displays hybrid system output or regeneration level (P.92) Multi-information display Presents the driver with a variety of driving-related data (P.94) Displays warning messages if a malfunction occurs (P.453)
  • Page 93 2-1. Instrument cluster Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Oil maintenance: Displays the distance until the next engine oil change. Shift position and shift range indicator Displays the selected shift position or selected shift range (P.204) Outside temperature (P.92)
  • Page 94 ● When “--” or “E” is displayed, the vehicle in a safe place, and check system may be malfunctioning. the engine after it has cooled Take your vehicle to your Toyota completely. (P.474) dealer. ● Displays the outside temperature within the range of -40°F (-40°C) Using the “ODO TRIP”...
  • Page 95 2-1. Instrument cluster instrument cluster brightness. Pop-up display ■ Distance until the next engine oil change will be displayed when a warning message indicating that oil maintenance is required or should be performed soon is displayed. Changing the instrument panel light brightness The brightness of the instrument panel lights can be adjusted.
  • Page 96: Multi-Information Display (4.2- Inch Display)

    2-1. Instrument cluster Multi-information dis- Menu icons (P.95) play (4.2-inch display) Information display area A variety of information can be dis- The multi-information dis- played by selecting a menu icon. play is used to display fuel Additionally, warning or sugges- efficiency related informa- tion/advice pop-up displays will be displayed in some situations.
  • Page 97 2-1. Instrument cluster history display Icon Display Linked with the hands-free Driving information dis- system, sending or receiving play (P.96) call is displayed. For details regarding the hands-free sys- Driving support system information display tem, refer to “NAVIGATION (P.98) AND MULTIMEDIA SYS- TEM OWNER’S MANUAL”.
  • Page 98 2-1. Instrument cluster Fuel Economy pedal according to driving condi- ■ tions, and a score result that Following information is dis- evaluates the current driving played. status. Distance to empty ECO Accelerator Guidance Displays the driving range with remaining fuel. (P.98) “Eco Score”...
  • Page 99 2-1. Instrument cluster starting off and cruising. The ECO Accelerator Guidance display changes according to the driving status, such as when start- ing off or cruising. It is easier to drive in an Eco- friendly manner by driving accord- ing to the display showing the accelerator pedal operations and staying within the reference opera- Not yet evaluated...
  • Page 100 2-1. Instrument cluster (P.243) The percent traveled using only electric motor power after starting  RSA (Road Sign Assist) (if the hybrid system is displayed. equipped) (P.253) : It is reset each time the hybrid  Dynamic radar cruise control system stops.
  • Page 101 2-1. Instrument cluster elapsed time since hybrid system ball on the display. start Maximum G-force course : These items are reset each time This item is linked with the G-force the hybrid system stops. display and the course of the past movement of the ball is displayed.
  • Page 102 2-1. Instrument cluster screen is displayed, select the Select to change the pre-collision warning timing. setting or desired value (time, etc.) with BSM (Blind Spot Moni- ■ tor) (P.267) After changing the settings, Select to set up the following press of the meter control items.
  • Page 103 2-1. Instrument cluster Select to change the RCTA buzzer Select the open position when volume. power back door is fully open. • “Volume” PKSB (Parking Sup- ■ Select to set the volume of the port Brake System) (if buzzer which sounds when the equipped) (P.283) power back door system operates.
  • Page 104 2-1. Instrument cluster the multi-information display. and lower side of the drive informa- tion screen. from three items, aver-  “Units” age speed, distance and total time. Select to change the units of mea-  “Trip Summary” sure displayed. Select to set the items displayed ...
  • Page 105 2-1. Instrument cluster played suggestion, use the temporarily suspended. • When a warning message meter control switches. appears on the multi-information display Suggestion to enable the ■ • When the vehicle begins to move power back door ● Settings for functions not If the power back door system is equipped to the vehicle are not displayed.
  • Page 106: Multi-Information Display (7- Inch Display)

    2-1. Instrument cluster “Yes”. Multi-information dis- play (7-inch display) If the driver’s door is opened after the power switch is turned off, this suggestion message will not be dis- The multi-information dis- played. play is used to display fuel efficiency related informa- ■...
  • Page 107 2-1. Instrument cluster Information display area Return to the previous screen A variety of information can be dis- Call sending/receiving and played by selecting a menu icon. history display Additionally, warning or sugges- Linked with the hands-free tion/advice pop-up displays will be system, sending or receiving displayed in some situations.
  • Page 108 2-1. Instrument cluster start. Icon Display Driving range Driving information dis- play (P.106) Displays the driving range with remaining fuel. (P.109) Driving support system Gadget information display (P.109) The following items can be dis- played by changing the settings for Audio system-linked dis- gadget content and fuel economy play (P.110)
  • Page 109 2-1. Instrument cluster When refueling, turn the power ECO area switch off. If the vehicle is refueled Shows that the vehicle is being without turning the power switch driven in an Eco-friendly manner. off, the display may not be updated. Power area : Use the displayed fuel consump- Shows that an Eco-friendly driving...
  • Page 110 2-1. Instrument cluster Speedometer display/Dis- ■ tance to empty Eco start status Eco cruise status Speedometer display Eco stop status Displays the vehicle speed. Score result Distance to empty Displays the driving range with remaining fuel. (P.109) EV Ratio/EV Driving Ratio ■...
  • Page 111 2-1. Instrument cluster tion. As a result, the actual dis- Navigation system-linked tance that can be driven may display (if equipped) differ from that displayed. ● When only a small amount of fuel Select to display the following is added to the tank, the display may not be updated.
  • Page 112 2-1. Instrument cluster AWD system display  Reset the record Maximum G- ■ force course using the Toyota multi-operation touch (if equipped) Select “Clear” when displayed full screen. Safety system status ■ Select to display the operational status of the following systems: Torque distribution display ...
  • Page 113 2-1. Instrument cluster • For functions that allow oper- items. ation contents, display con-  PCS on/off tents, etc., of function to be Select to enable/disable the pre- selected, the setting screen is collision system. displayed by pressing and  “Sensitivity” holding .
  • Page 114 2-1. Instrument cluster RCTA (Rear Cross Traffic ■ Vehicle Settings ■ Alert) (P.267)  PBD (Power Back Door)  RCTA (Rear Cross Traffic (P.137) Alert) on/off Select to set up the following items. Select to enable/disable the RCTA • System settings system.
  • Page 115 2-1. Instrument cluster Select to reset the scheduled main- • Incoming call display of the tenance information (message indi- hands-free phone system cating maintenance is required and • Audio operation distance until the next mainte- • Volume operation nance) after all maintenance is per- formed.
  • Page 116 2-1. Instrument cluster sage will be displayed asking if WARNING you wish to enable the power ■ Cautions during setting up back door system. To enable the display the power back door system, As the hybrid system needs to be select “Yes”.
  • Page 117 2-1. Instrument cluster certain speed with a power win- dow open, a suggestion mes- sage will be displayed asking if you wish to close the power win- dows. To close all of the power windows, select “Yes”. ■ Customization The suggestion function can be turned on/off.
  • Page 118: Head-Up Display

    2-1. Instrument cluster Head-up display : If equipped The head-up display projects a variety of driving-related infor- mation and the operating state of the driving support systems on the windshield. System components Illustrations used in this text are intended as examples, and may differ from the image that is actually displayed by the head-up display.
  • Page 119 2-1. Instrument cluster through sunglasses, especially ● Do not touch the inside of the polarized sunglasses. Adjust the head-up display projector or brightness of the head-up display or thrust sharp edges or the like remove your sunglasses. into the projector. Doing so could cause mechani- ■...
  • Page 120 2-1. Instrument cluster • Compass (heading-up display) (if WARNING equipped) ■ Caution for changing settings • Audio system operation status of the head-up display : Make sure to enable this display As the hybrid system needs to be when using the driving support operating while changing the set- tings of the head-up display, systems...
  • Page 121 2-1. Instrument cluster systems will be displayed when Warning message ■ necessary. Some warning messages are Driving support systems displayed when necessary, ■ according to certain conditions. Displays a warning/sugges- tion/advice message or the Details of content displayed on the head-up display may differ from operating state of a relevant that displayed on the multi-informa-...
  • Page 122: Energy Monitor/Consumption Screen

    (less than 12 mph [20 Meter control switches km/h]) • When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) ● When “--” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer.
  • Page 123  Energy monitor tem screen (with 12.3-inch display) The energy monitor can be used Select on the Toyota to check the vehicle drive status, multi-operation touch hybrid system operation status (P.345). and energy regeneration status. Select “Energy” on the split- Display procedure ■...
  • Page 124 2-1. Instrument cluster When energy is not flowing, an Navigation or multimedia sys-  arrow is not displayed. tem screen (with 8-inch dis- play) Green: Shows that the electrical energy charging or recovering. Yellow: Shows that the electrical energy using. Red: Shows that the gasoline engine power using.
  • Page 125 2-1. Instrument cluster Navigation or multimedia sys- The figure shows all the arrows for  the purpose of this explanation, but tem screen (with 8-inch dis- the actual contents of the display play) (Home screen) will differ. Gasoline engine Front electric motor (traction motor) Rear electric motor (traction motor)
  • Page 126 Resetting the consumption Navigation or multimedia sys-  data tem screen (with 12.3-inch display) Current fuel consumption Select on the Toyota Average vehicle speed since multi-operation touch the hybrid system was (P.345). started. Elapsed time since the hybrid system was started.
  • Page 127 Navigation or multimedia sys- tion  tem screen (with 12.3-inch Latest fuel consumption display) Previous fuel consumption Select on the Toyota record multi-operation touch Resetting the history data (P.345). Updating the latest fuel con- sumption data The average fuel consumption his-...
  • Page 128 2-1. Instrument cluster tions. ■ Updating the history data Update the latest fuel consumption by selecting “Update” to measure the current fuel consumption again. ■ Resetting the data The fuel consumption data can be deleted by selecting “Clear”. ■ Cruising range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining.
  • Page 129: Before Driving

    Before driving 3-1. Key information Keys ......3-2. Opening, closing and locking the doors Side doors....Back door....Smart key system ..3-3. Adjusting the seats Front seats ....Rear seats....Driving position memory ........Head restraints.... 3-4. Adjusting the steering wheel and mirrors Steering wheel ....
  • Page 130: Keys

    (P.130) be damaged, it is recommended that replacement is carried out by Mechanical keys your Toyota dealer. Key number plate ● To avoid serious deterioration, do not leave the electronic key within 3 ft.
  • Page 131 The number of keys already regis- ● Do not place the keys near tered to the vehicle can be con- medical electrical equipment firmed. Ask your Toyota dealer for such as low-frequency therapy details. equipment or microwave ther- apy equipment, and do not ■...
  • Page 132 (P.467) Opens and closes the power back door (P.137) Sounds the alarm (P.130) : This setting must be customized at your Toyota dealer. ■ Theft deterrent panic mode When is pressed for longer than about 1 second, an alarm will sound intermittently and the vehicle ■...
  • Page 133 Holding windows. the driver’s door handle for : This setting must be customized approximately 2 seconds at your Toyota dealer. unlocks all the doors. Grip the front passenger’s ■ Switching the door unlock func- door handle or rear door han-...
  • Page 134 3-2. Opening, closing and locking the doors approximately 5 seconds while ■ Impact detection door lock release system pressing and holding In the event that the vehicle is sub- The setting changes each time an ject to a strong impact, all the doors operation is performed, as shown are unlocked.
  • Page 135 3-2. Opening, closing and locking the doors a door other than the door you are determines that luggage, etc. has locking is open, a buzzer sounds been placed in a rear seat based on opening and closing of a rear continuously for 5 seconds.
  • Page 136 3-2. Opening, closing and locking the doors Using the inside lock but- ■ WARNING tons ■ When opening or closing a door Check the surroundings of the vehicle such as whether the vehi- cle is on an incline, whether there is enough space for a door to open and whether a strong wind is blowing.
  • Page 137 3-2. Opening, closing and locking the doors with the entry function or wireless Function Operation remote control. All doors are automatically Rear door child-protector Speed linked locked when lock door locking vehicle speed is function approximately 12 The door cannot be opened mph (20 km/h) or from inside the vehicle when the higher.
  • Page 138: Back Door

    3-2. Opening, closing and locking the doors Back door ● Never let anyone sit in the lug- gage compartment. In the event of sudden braking, The back door can be sudden swerving or a collision, they are susceptible to death or locked/unlocked and serious injury.
  • Page 139 3-2. Opening, closing and locking the doors locked. WARNING Using the wireless remote ■ ● When closing the back door, control take extra care to prevent your fingers etc. from being caught. P.131 ■ Operation signals P.132 ■ Security feature P.132 Unlocking and locking the ●...
  • Page 140 3-2. Opening, closing and locking the doors Using the power back door ■ switch on the instrument panel Press and hold the switch. The power back door automatically opens/closes. Unlock the back door before oper- ating.  Close Pressing the switch while the power back door is opening/closing stops Press the switch on the lower...
  • Page 141 3-2. Opening, closing and locking the doors Using the kick sensor (vehi- one will sound and the power back ■ door will begin closing automati- cles with Hands Free Power cally. All the doors except the Back Door) power back door are locked and The Hands Free Power Back then power back door will also be Door enables automatic opening...
  • Page 142 3-2. Opening, closing and locking the doors Perform a kick operation by form the reverse operation. moving your foot to within ■ Luggage compartment light approximately 3.9 in. (10 cm) ● The luggage compartment light of the rear bumper and then turns on when the back door is pulling it back.
  • Page 143 3-2. Opening, closing and locking the doors ■ Jam protection function inside the vehicle after starting a close operation via the door Sensors are equipped on both sides reserve lock function, the elec- of the power back door. If anything tronic key may become locked obstructs the power back door while inside the vehicle.
  • Page 144 3-2. Opening, closing and locking the doors not near the vehicle an electrical noise source which affects the sensitivity of the Hands ■ Kick sensor operating condi- Free Power Back Door, such as a tions (vehicles with Hands Free pay parking spot, gas station, Power Back Door) electrically heated road, or fluo- The Hands Free Power Back Door...
  • Page 145 3-2. Opening, closing and locking the doors object, such as a ball, moves under the rear bumper ● When an object is moved from under the rear bumper ● If someone is swinging their legs while sitting on the rear bumper ●...
  • Page 146 3-2. Opening, closing and locking the doors ● If the power back door system is WARNING turned off while the back door is ■ Back door closer operating automatically, the automatic operation is stopped. ● In the event that the back door The back door then has to be is left slightly open, the back operated manually.
  • Page 147 Hands Free Power Back Door. ● Do not attach any accessories Failure to do so may cause death other than genuine Toyota parts or serious injury. to the back door. ● Check the safety of the sur- ●...
  • Page 148 If it does not operate, have the vehicle inspected by your Toyota dealer. ● Do not apply coatings that have a rain clearing (hydrophilic) effect, or other coatings, to the lower center part of the rear bumper.
  • Page 149 If it does not oper- restore the original settings, they ate, have the vehicle inspected need to be changed back on the by your Toyota dealer. screen of the multi-information ● Do not subject the kick sensor display.
  • Page 150: Smart Key System

    3-2. Opening, closing and locking the doors that position. Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ...
  • Page 151 3-2. Opening, closing and locking the doors ■ Effective range (areas within ● When an exterior alarm sounds which the electronic key is once for 5 seconds detected) Correction pro- Situation cedure An attempt was Close all of the made to lock the doors and lock vehicle while a the doors again.
  • Page 152 3-2. Opening, closing and locking the doors mechanical key, to unlock the lowing metallic objects doors. • Cards to which aluminum foil is attached ■ Turning an electronic key to • Cigarette boxes that have alumi- battery-saving mode num foil inside ●...
  • Page 153 3-2. Opening, closing and locking the doors ■ Note for the entry function control to unlock the doors.) ● Even when the electronic key is ● Touching the door lock sensor within the effective range (detec- while wearing gloves may delay or tion areas), the system may not prevent lock operation.
  • Page 154 3-2. Opening, closing and locking the doors ■ When the vehicle is not driven ■ If the smart key system does for extended periods not operate properly ● To prevent theft of the vehicle, do ● Locking and unlocking the doors: not leave the electronic key within Use the mechanical key.
  • Page 155 3-2. Opening, closing and locking the doors For vehicles sold in Canada ...
  • Page 156 The radio waves may affect the of such medical devices. operation of such devices. If necessary, the entry function Ask your Toyota dealer for details can be disabled. Ask your for disabling the entry function. Toyota dealer for details, such...
  • Page 157: Adjusting The Seats

    3-3. Adjusting the seats Manual seat Front seats 3-3.Adjusting the seats  The seats can be adjusted (longitudinally, vertically, etc.). Adjust the seat to ensure the correct driving posture. Adjustment procedure Power seat  Seat position adjustment lever Seatback angle adjustment lever ■...
  • Page 158: Rear Seats

    3-3. Adjusting the seats Rear seats WARNING ● Make sure to leave enough space around the feet so they Reclining adjustments and do not get stuck. folding the seatbacks can ● Manual seat only: After adjust- be done with lever opera- ing the seat, make sure that the tion.
  • Page 159 3-3. Adjusting the seats This step is not necessary when WARNING operating the left side seat only. ● After adjusting the seat, make Folding down the seat- ■ sure that the seat is locked in backs position. If the seatback is not securely While pulling the seatback angle locked, the red marking will be adjustment lever...
  • Page 160: Driving Position Memory

    3-3. Adjusting the seats Driving position mem- WARNING ■ When folding the rear seat- backs down : If equipped ● Do not fold the seatbacks down while driving. This feature automatically adjusts the positions of the ● Stop the vehicle on level ground, set the parking brake driver’s seat, steering wheel and shift the shift lever to P.
  • Page 161 3-3. Adjusting the seats  The power switch has been press button “1” or “2” until turned to OFF. the buzzer sounds.  The driver’s seat belt has If the selected button has already been preset, the previously been unfastened. recorded position will be overwrit- ten.
  • Page 162 (either lock recalled in some situations when the or unlock) until the buzzer seat position is recorded in a certain sounds. range. For details, contact your Toyota dealer. If the button could not be regis- tered, the buzzer sounds continu-...
  • Page 163 3-3. Adjusting the seats If 2 or more keys are in the vehi- ously for approximately 3 seconds. cle, the driving position cannot be canceled properly. Check that the shift lever is in Turn the power switch to ON. While pressing the “SET” but- ton, press and hold the door lock switch (either lock or Recall procedure...
  • Page 164: Head Restraints

    3-3. Adjusting the seats Center rear seat ■ Head restraints Head restraints are pro- vided for all seats. WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ●...
  • Page 165 3-3. Adjusting the seats Outboard rear seats ■ Removing the head Align the head restraint with the restraints installation holes and push it Pull the head restraint up while down to the lowest lock position. pressing the lock release button If the head restraint touches the ceiling, making the removal difficult, change the seat height or angle.
  • Page 166: Adjusting The Steering

    3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors WARNING ■ Caution while driving Adjustment procedure Do not adjust the steering wheel while driving. Doing so may cause the driver to Operating the switch moves the mishandle the vehicle and cause steering wheel in the following an accident, resulting in death or...
  • Page 167: Inside Rear View Mirror

    3-4. Adjusting the steering wheel and mirrors Inside rear view mir- Anti-glare function Manual anti-glare inside rear  view mirror : If equipped Reflected light from the head- The rear view mirror’s posi- lights of vehicles behind can be tion can be adjusted to reduced by operating the lever.
  • Page 168: Digital Rear-View Mirror166

    3-4. Adjusting the steering wheel and mirrors Digital Rear-view Mir- : If equipped The Digital Rear-view Mirror is a system that uses the camera on the rear of the vehicle and displays its image on the display of the ■ To prevent sensor error (vehi- Digital Rear-view Mirror.
  • Page 169 3-4. Adjusting the steering wheel and mirrors Changing modes WARNING • Change to digital mirror mode Operate the lever to change and adjust the display settings. between digital mirror mode and ● As the range of the image dis- optical mirror mode. played by the Digital Rear-view Mirror is different from that of the optical mirror, make sure to...
  • Page 170 Digital Rear-view Mirror in digital Press the menu button. mirror mode, the system may be malfunctioning. The symbol will dis- appear in a few seconds. Operate the lever, change to optical mirror mode and have the vehicle inspected by your Toyota dealer.
  • Page 171 3-4. Adjusting the steering wheel and mirrors The icons will be displayed. Icons Settings Select to enable/disable the automatic anti-glare func- tion. Responding to the bright- ness of the headlights of vehicles behind, the reflected light is automati- cally adjusted. Press the menu button The automatic anti-glare function is enabled each...
  • Page 172 3-4. Adjusting the steering wheel and mirrors When using the optical mirror ■ To prevent the light sensors  from malfunctioning mode To prevent the light sensors from Press the menu button. malfunctioning, do not touch or cover them. The icons will be displayed. Press the menu button repeatedly and select The setting display will be dis-...
  • Page 173 If the driver continues using the Digital Rear-view Mirror while smoke or odor comes from the mirror, it may result in fire. Stop using the system immediately and contact your Toyota dealer. Cleaning the Digital Rear- view Mirror ■ The cooling fan...
  • Page 174 Do not subject the camera to a strong impact as this could cause a malfunction. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. Do not block the vent holes of ● the mirror. Otherwise, the mirror may be hot, leading to a mal- function or a fire.
  • Page 175 3-4. Adjusting the steering wheel and mirrors table for the likely cause and the solution. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
  • Page 176 3-4. Adjusting the steering wheel and mirrors Symptom Likely cause Solution Clean the mirror surface The mirror surface is gently, using a soft dry dirty. cloth. Change to optical mirror mode. (Vehicles with pan- Sunlight or headlights oramic fixed moon roof are shining directly into with one-touch frosted the Digital Rear-view...
  • Page 177 Toyota dealer. The display is dim and Change to optical mirror The system may be mal- mode and have the vehi- is displayed.
  • Page 178 Rear-view Mirror will does not disap- turn off.) pear even though the mirror is cool, have the vehicle inspected by your Toyota dealer. Change to optical mirror mode and have the vehi- cle inspected by your Toyota dealer. The lever cannot be...
  • Page 179: Outside Rear View Mirrors

    3-4. Adjusting the steering wheel and mirrors Outside rear view mir- Adjustment procedure rors To select a mirror to adjust, turn the switch. The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. ■...
  • Page 180 3-4. Adjusting the steering wheel and mirrors Folding the mirrors Folds the mirrors Extends the mirrors Putting the outside rear view mirror folding switch in the neutral position (A) sets the mirrors to automatic mode. Automatic mode allows the folding or extending of the mirrors to be linked to locking/unlocking of the doors.
  • Page 181: 3-5. Opening, Closing The Windows

    3-5. Opening, closing the windows between the side window and the Power windows 3-5.Opening, closing the windows window frame while the side window is closing, side window movement is stopped and the side window is Opening and closing the opened slightly. power windows ■...
  • Page 182 (P.78) : These settings must be custom- ● When using the wireless remote ized at your Toyota dealer. control or mechanical key and ■ Power window open reminder operating the power windows, function...
  • Page 183 3-5. Opening, closing the windows locked. WARNING The passenger windows can still be ● When exiting the vehicle, turn opened and closed using the the power switch to OFF, carry driver’s switch even if the lock the key and exit the vehicle along with the child.
  • Page 184: Driving

    Hybrid vehicle driving tips Rear window wiper and ........washer....... Winter driving tips..4-4. Refueling Utility vehicle precautions Opening the fuel tank cap ..............4-5. Using the driving support systems Toyota Safety Sense 2.0 ........PCS (Pre-Collision System) ........
  • Page 185 4-1. Before driving Set the parking brake Driving the vehicle 4-1.Before driving (P.208), and shift the shift lever to P (P.205). The following procedures Turn the power switch to should be observed to OFF to stop the hybrid sys- ensure safe driving: tem.
  • Page 186 By keeping the vehicle snow. within the ECO Accelerator Guid- ■ Breaking in your new Toyota ance range, the “Cruise” score will To extend the life of the vehicle, increase. observing the following precautions ●...
  • Page 187 4-1. Before driving ■ Operating your vehicle in a for- ● The driver should pay extra eign country attention to pedestrians when Comply with the relevant vehicle the vehicle is powered only by registration laws and confirm the the electric motor (traction availability of the correct fuel.
  • Page 188 4-1. Before driving ● Sudden acceleration, engine WARNING braking due to shifting, or ● Do not adjust the position of the changes in engine speed could steering wheel, the seat, inside cause the vehicle to skid. rear view mirror (if equipped), Digital Rear-view Mirror (if ●...
  • Page 189 Have the brake pads checked and lead to a fire. replaced by your Toyota dealer as soon as possible. • The temperature inside the Rotor damage may result if the vehicle may cause the plastic...
  • Page 190 4-1. Before driving ● If the electronically controlled WARNING brake system does not operate, ● Do not leave a door or window do not follow other vehicles open if the curved glass is closely and avoid hills or sharp coated with a metallized film turns that require braking.
  • Page 191 ● Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function...
  • Page 192: Cargo And Luggage

    4-1. Before driving Cargo and luggage ● Do not place cargo or luggage in or on the following locations. • At the feet of the driver Take notice of the following • On the front passenger or rear information about storage seats (when stacking items) precautions, cargo capacity •...
  • Page 193 (P.194) Steps for Determining Correct Load Limit  Toyota does not recommend towing a trailer with your vehicle. (1) Locate the statement “The Your vehicle is not designed for combined weight of occupants trailer towing.
  • Page 194 4-1. Before driving load Calculation formula for As shown in the example above, your vehicle if the number of occupants increases, the cargo and lug- gage load will be reduced by an amount that equals the increased weight due to the additional occupants.
  • Page 195: Vehicle Load Limits

    150 lb. (68 kg) per person.  Towing capacity Toyota does not recommend towing a trailer with your vehi- cle.  Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
  • Page 196: Trailer Towing

    4-1. Before driving Trailer towing Dinghy towing Toyota does not recom- Your vehicle is not designed mend towing a trailer with to be dinghy towed (with 4 your vehicle. Toyota also wheels on the ground) does not recommend the behind a motor home.
  • Page 197: 4-2. Driving Procedures

    4-2. Driving procedures The hybrid system can be started Power (ignition) 4-2.Driving procedures from any power switch mode. switch Performing the following operations when carrying the electronic key on your person starts the hybrid system or changes power switch modes. Check that the “READY”...
  • Page 198 ● The immobilizer system may not locked due to the steering lock have been deactivated. (P.77) function. Operating the power Contact your Toyota dealer. switch again automatically can- ● If a message related to start-up is cels the steering lock.
  • Page 199 If the hybrid system becomes diffi- cult to start, have your vehicle ● If attempting to restart the hybrid checked by your Toyota dealer system immediately after turning immediately. the power switch to OFF, the hybrid system may not start in ■...
  • Page 200 4-2. Driving procedures ing the power switch. WARNING Release the brake pedal and ■ Stopping the hybrid system check that “ACCESSORY” or in an emergency “IGNITION ON” is not shown ● If you want to stop the hybrid on the multi-information dis- system in an emergency while driving the vehicle, press and play.
  • Page 201 4-2. Driving procedures WARNING ■ When parking Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions. Failure to do so may cause exhaust gases to enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard.
  • Page 202 4-2. Driving procedures power switch shortly and sounds and a message will be dis- played on the multi-information firmly. display. If this continues, the power switch is automatically turn Check that “ACCESSORY” to OFF. or “IGNITION ON” on the However, this function cannot multi-information display is entirely prevent the 12-volt battery off.
  • Page 203: Ev Drive Mode

    4-2. Driving procedures EV drive mode ■ Situations in which EV drive mode cannot be turned on It may not be possible to turn EV In EV drive mode, electric drive mode on in the following situa- power is supplied by the tions.
  • Page 204 4-2. Driving procedures ■ Automatic cancelation of EV WARNING drive mode ■ Caution while driving When driving in EV drive mode, the gasoline engine may automatically When driving in EV drive mode, restart in the following situations. pay special attention to the area When EV drive mode is canceled, a around the vehicle.
  • Page 205: Hybrid Transmission

    4-2. Driving procedures ■ Restraining sudden start (Drive- Hybrid transmission Start Control) P.185 Select the shift position depending on your purpose WARNING and situation. ■ When driving on slippery road surfaces Be careful of downshifting and Shift position purpose sudden acceleration, as this could and functions result in the vehicle skidding to the side or spinning.
  • Page 206 Have the vehicle inspected by your While the power switch Toyota dealer immediately. is in ON and the brake pedal The following steps may be used as depressed...
  • Page 207 4-2. Driving procedures the button on the shift knob. The shift lever can be shifted while both buttons are pressed. Upshifting Downshifting WARNING The selected shift range, from S1 to ■ To prevent an accident when S6, will be displayed on the multi- releasing the shift lock information display.
  • Page 208: Turn Signal Lever

    S Operating instructions This may indicate a malfunction in the transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situa- tion, the transmission will operate in the same manner as when the shift lever is in D.)
  • Page 209: Parking Brake

    4-2. Driving procedures When all the turn signal lights are Parking brake flashing at an abnormally fast speed, have the vehicle inspected by your Toyota dealer. The parking brake can be ■ If the turn signals stop flashing set or released automati- before a lane change has been cally or manually.
  • Page 210 4-2. Driving procedures parking brake. operates as follows. The parking brake indicator light  When the shift lever is shifted and parking brake switch indicator from P, the parking brake will will turn on. be released, and the parking Pull and hold the parking brake brake indicator light and park- switch if an emergency occurs and ing brake switch indicator will...
  • Page 211 WARNING times, the system may be malfunc- ■ When parking the vehicle tioning. Have the vehicle inspected by your Toyota dealer. Do not leave a child in the vehicle alone. The parking brake may be ■ Parking brake operation sound...
  • Page 212: Brake Hold

    (yel- and increase brake wear. Have the vehicle inspected by your low) comes on. Toyota dealer immediately if this occurs. ■ Brake hold system operating conditions The brake hold system cannot be...
  • Page 213 Have and a message will be shown on the the vehicle inspected at your Toyota multi-information display. The park- dealer. ing brake will then be set automati- cally.
  • Page 214 4-2. Driving procedures WARNING ■ When stopped on a slippery road The system cannot stop the vehi- cle when the gripping ability of the tires has been exceeded. Do not use the system when stopped on a slippery road. NOTICE ■...
  • Page 215: 4-3. Operating The Lights And Wipers

    4-3. Operating the lights and wipers Headlight switch 4-3.Operating the lights and wipers Canada  The headlights can be oper- ated manually or automati- cally. Turning on the headlights Operating the switch turns on the lights as follows: U.S.A.  The side marker lights, parking lights, tail lights, license plate lights, and...
  • Page 216 4-3. Operating the lights and wipers ● To make your vehicle more visible diately if on the key is to other drivers during daytime pressed after all the doors are driving, the daytime running lights closed.) turn on automatically when all of the following conditions are met.
  • Page 217 If “Headlight System Malfunc- tion Visit Your Dealer” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Customization Settings (e.g. light sensor sensitiv- ity) can be changed. (Customizable features: P.509) NOTICE ■...
  • Page 218: Ahb (Automatic High Beam)

    4-3. Operating the lights and wipers Turn the headlight switch to AHB (Automatic High Beam) position. The Automatic High Beam indicator will come on when the system is The Automatic High Beam operating. uses an in-vehicle front camera to assess the bright- ness of streetlights, the lights of vehicles ahead etc., and automatically turns the...
  • Page 219 4-3. Operating the lights and wipers by another vehicle fog, mist, ice, dirt, etc. • When vehicles ahead are hidden • The windshield is cracked or dam- aged from sight due to repeated curves, road dividers or roadside trees • The front camera is deformed or •...
  • Page 220 4-3. Operating the lights and wipers Have the vehicle inspected by your Toyota dealer. ■ Temporarily lowering sensor sensitivity The sensitivity of the sensor can be temporarily lowered. Turn the power switch to OFF while the following conditions are met.
  • Page 221: Windshield Wipers And Washer

    4-3. Operating the lights and wipers Windshield wipers and washer Operating the lever can switch between automatic operation and manual oper- ation, or can use the washer. ■ Temporarily switching to the NOTICE low beams ■ When the windshield is dry It is recommended to switch to the low beams when the high beams Do not use the wipers, as they...
  • Page 222 4-3. Operating the lights and wipers Rain-sensing windshield wip-  High speed operation Temporary operation : For the U.S.A. : For Canada Wiper intervals can be adjusted when intermittent operation is selected. Rain-sensing opera- tion Low speed Increases the intermittent operation windshield wiper frequency High speed...
  • Page 223 4-3. Operating the lights and wipers mode will not switch.) Vehicles with rain-sensing wind-  shield wipers With low speed windshield wiper operation selected, wiper operation will be switched from low speed to intermittent wiper operation when the vehicle is stationary. (However, when the sensor sensitivity is adjusted to the highest level, the Increases the sensitivity...
  • Page 224 Do not operate the switch continu- ally as the washer fluid pump may overheat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
  • Page 225: Rear Window Wiper And Washer

    ■ Back door opening linked rear window wiper stop function : The setting must be customized at Intermittent your Toyota dealer. operation When the rear window wiper is Normal oper- operating, if the back door is opened ation...
  • Page 226 Do not operate the switch continu- ally as the washer fluid pump may overheat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. ■...
  • Page 227: Refueling

    4-4. Refueling Opening the fuel tank 4-4.Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure The fuel tank of your vehicle to do so may result in death or has a special structure, serious injury.
  • Page 228 4-4. Refueling opener. WARNING ■ When refueling Observe the following precautions to prevent fuel overflowing from the fuel tank: ● Securely insert the fuel nozzle into the fuel filler neck. ● Stop filling the tank after the fuel nozzle automatically clicks off. ●...
  • Page 229 WARNING ■ When replacing the fuel tank Do not use anything but a genu- ine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or seri- ous injury.
  • Page 230: Using The Driving Support Systems

    Toyota Safety Sense 4-5.Using the driving support systems WARNING ■ Toyota Safety Sense 2.0 The Toyota Safety Sense 2.0 is designed to operate under the The Toyota Safety Sense assumption that the driver will 2.0 consists of the following drive safely, and is designed to...
  • Page 231 In the following cases, the radar Otherwise, the radar sensor may sensor must be recalibrated. not operate properly, possibly Contact your Toyota dealer for leading to an accident resulting in details. death or serious injury. • When the radar sensor or front grille are removed and installed, ●...
  • Page 232 Also, do not touch the lens. If the lens is dirty or damaged, contact your Toyota dealer. ● Do not subject the front camera to a strong impact. From the top of the windshield ●...
  • Page 233 4-5. Using the driving support systems ■ Certification For vehicles sold in the U.S.A., Hawaii, Guam, Saipan and Puerto Rico  For vehicles sold in Canada ...
  • Page 234 In the following situations, perform the actions specified in the table. When the normal operating conditions are detected, the message will disappear and the system will become operational. If the message does not disappear, contact your Toyota dealer. Situation Actions...
  • Page 235 If the message does not disappear, contact your Toyota dealer. • When the temperature around the radar sensor is outside of the opera- tional range, such as when the vehicle is in the sun or in an extremely cold environment •...
  • Page 236: Pcs (Pre-Collision System)

    4-5. Using the driving support systems PCS (Pre-Collision Sys- System functions tem) Pre-collision warning ■ When the system determines The pre-collision system that the possibility of a frontal uses a radar sensor and collision is high, a buzzer will front camera to detect sound and a warning message objects (P.345) in front of will be displayed on the multi-...
  • Page 237 4-5. Using the driving support systems ■ Pre-collision braking WARNING ● When the pre-collision braking ■ Limitations of the pre-colli- function is operating, a large sion system amount of braking force will be ● The driver is solely responsible applied. for safe driving.
  • Page 238 4-5. Using the driving support systems Changing settings of the WARNING pre-collision system ● When your vehicle is towing another vehicle Enabling/disabling the pre- ■ ● When transporting the vehicle collision system via truck, boat, train or similar means of transportation The pre-collision system can be ●...
  • Page 239 4-5. Using the driving support systems Middle This is the default setting. Late Early ■ Operational conditions The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a detected object is high. Each function is operational at the following speed ●...
  • Page 240 4-5. Using the driving support systems ● Pre-collision braking Relative speed between Detectable objects Vehicle speed your vehicle and object Approx. 7 to 110 mph Approx. 7 to 110 mph Vehicles (10 to 180 km/h) (10 to 180 km/h) Bicyclists and pedestri- Approx.
  • Page 241 4-5. Using the driving support systems the entrance of a curve your vehicle • When passing under an object (road sign, billboard, etc.) • When there are patterns or paint in front of your vehicle that may be mistaken for a detectable object •...
  • Page 242 4-5. Using the driving support systems • If a detectable object makes an truck abrupt maneuver (such as sudden • If a preceding vehicle has a low swerving, acceleration or deceler- rear end, such as a low bed trailer ation) •...
  • Page 243 4-5. Using the driving support systems such as heavy rain, fog, snow or a • If the vehicle is not properly main- sandstorm tained (brakes or tires are exces- sively worn, improper tire inflation • When driving through steam or smoke pressure, etc.) •...
  • Page 244: Lta (Lane Tracing Assist)

    4-5. Using the driving support systems LTA (Lane Tracing WARNING Assist) ■ Before using LTA system ● Do not rely solely upon the LTA system. The LTA system does When driving on highways not automatically drive the vehi- and freeways with white cle or reduce the amount of (yellow) lane lines, this attention that must be paid to...
  • Page 245 ● If your windshield needs ● Vehicle is being driven around a repairs, contact your Toyota sharp curve. dealer. ■ Conditions in which functions may not operate properly In the following situations, the...
  • Page 246 4-5. Using the driving support systems ● The vehicle is driven in an area WARNING without white (yellow) lines, ● Objects or patterns that could such as in front of a tollgate or be mistaken for white (yellow) checkpoint, or at an intersec- lines are present on the side of tion, etc.
  • Page 247 4-5. Using the driving support systems ing is displayed on the multi- WARNING information display, and either a ● The traffic lane is excessively warning buzzer will sound or the narrow or wide. steering wheel will vibrate to ● The vehicle is extremely tilted alert the driver.
  • Page 248 4-5. Using the driving support systems Vehicle sway warning func- ■ from its lane or course , the sys- tion tem provides assistance as nec- essary by operating the steering When the vehicle is swaying wheel in small amounts for a within a lane, the warning short period of time to keep the buzzer will sound and a mes-...
  • Page 249 4-5. Using the driving support systems traffic jam, this function will operate next time the hybrid system is to help follow a preceding vehicle started. by monitoring the position of the preceding vehicle. If the system detects that the steer- ing wheel has not been operated for a fixed amount of time or the steering wheel is not being firmly...
  • Page 250 4-5. Using the driving support systems Inside of displayed lines is Indicates that steering wheel assis-  tance of the steering assist function white or lane centering function is operat- ing. Both outer sides of the lane are dis- played: Indicates that steering wheel assist of the lane centering function is operating.
  • Page 251 4-5. Using the driving support systems • LTA is turned on. This function operates when all of • Vehicle speed is approximately 32 the following conditions are met. mph (50 km/h) or more. • Setting for “Sway Warning” in the •...
  • Page 252 4-5. Using the driving support systems ■ Temporary cancelation of func- an adjacent lane. tions ● Do not attempt to test the opera- ● When operation conditions are no tion of the lane departure alert longer met, a function may be function.
  • Page 253 The system may not be operating the driver is driving without hold- properly. Have the vehicle inspected ing the steering wheel while the by your Toyota dealer. steering wheel assist of the steer- ing assist function is operating. ● “LTA Unavailable”...
  • Page 254: Rsa (Road Sign Assist)

    4-5. Using the driving support systems RSA (Road Sign Indication on the multi- Assist) information display When the front camera recog- : If equipped nizes a sign, the sign will be dis- The RSA system recognizes played on the multi-information specific road signs using display.
  • Page 255 4-5. Using the driving support systems signs are recognized, they will  When the RSA system recog- be displayed in an overlapping nizes a do not enter sign and stack under the current speed determines that your vehicle limit sign. has entered a no-entry area, the displayed sign will flash and a buzzer will sound.
  • Page 256 ● The contrast of electronic sign is The system may be malfunctioning. low. Have the vehicle inspected by your Toyota dealer. ● All or part of the sign is hidden by the leaves of a tree, a pole, etc. ■...
  • Page 257: Dynamic Radar Cruise Control With Full-Speed Range

    4-5. Using the driving support systems Operation switches ■ Dynamic radar cruise control with full-speed range Summary of functions In vehicle-to-vehicle distance control mode, the vehicle auto- matically accelerates, deceler- ates and stops to match the Vehicle-to-vehicle distance speed changes of the preceding switch vehicle even if the accelerator pedal is not depressed.
  • Page 258 4-5. Using the driving support systems ■ Cautions regarding the driv- WARNING ing assist systems ● The dynamic radar cruise con- Observe the following precau- trol with full-speed range pro- tions, as there are limitations to vides driving assistance to the assistance provided by the reduce the driver’s burden.
  • Page 259 4-5. Using the driving support systems ● When weather conditions are WARNING bad enough that they may pre- ● Assisting the driver to operate vent the sensors from detecting the vehicle correctly (fog, snow, sandstorm, heavy rain, etc.) The dynamic radar cruise control with full-speed range does not ●...
  • Page 260 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle- to-vehicle following distance, and operates to maintain a suitable fol- lowing distance from the vehicle ahead.
  • Page 261 4-5. Using the driving support systems control continues to keep your vehicle stopped. When the turn signal lever is operated and your vehicle moves to an over- taking lane while driving at 50 mph (80 km/h) or more, the vehicle will accel- erate to help to overtake a passing vehicle.
  • Page 262 4-5. Using the driving support systems speed will be increased or set speed. decreased as follows: For the U.S. mainland and  Hawaii Fine adjustment: By 1 mph (1.6 km/h) or 1 km/h (0.6 mph) each time the switch is pressed Large adjustment: Increases or decreases in 1 mph (1.6 km/h) 1 km/h (0.6 mph)
  • Page 263 4-5. Using the driving support systems Accelerate with accelerator below. Note that the distances pedal operation to the shown correspond to a vehicle desired vehicle speed speed of 50 mph (80 km/h). Vehicle-to-vehicle distance Press the “-SET” switch increases/decreases in accor- dance with vehicle speed.
  • Page 264 4-5. Using the driving support systems the cruise control is not possi- ble, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehicle.
  • Page 265 4-5. Using the driving support systems mode is selected, your vehicle Adjusting the speed setting: P.261 will maintain a set speed without Canceling and resuming the speed controlling the vehicle-to-vehi- setting: P.263 cle distance. Select this mode only when vehicle-to-vehicle dis- tance control mode does not function correctly due to a dirty radar, etc.
  • Page 266 Contact your Toyota dealer. acceleration is required. ■ Automatic cancelation of con- As the sensor may not be able to...
  • Page 267 4-5. Using the driving support systems ● Motorcycles traveling in the same ● When steering wheel operation or lane your position in the lane is unsta- ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ●...
  • Page 268: Bsm (Blind Spot Monitor)

    4-5. Using the driving support systems BSM (Blind Spot Moni- ■ Cautions regarding the use of the RCTA function tor) The driver is solely responsible for safe driving. Always drive safely, The Blind Spot Monitor is a taking care to observe your sur- roundings.
  • Page 269 There may be a sensor malfunction enabled/disabled on the or misaligned. Have the vehicle screen of the multi-information inspected at a Toyota dealer. display. (P.100, 111) ■ Customization When the Blind Spot Monitor is dis- Some functions can be customized.
  • Page 270 4-5. Using the driving support systems ■ Certification for the Blind Spot Monitor For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
  • Page 271 If a sensor or the rear bumper needs to be removed/installed or replaced, contact your ● Keep the sensors and the sur- Toyota dealer. rounding areas on the rear ● Do not paint the rear bumper bumper clean at all times.
  • Page 272 4-5. Using the driving support systems The range of each detection area Vehicles that are traveling in areas that are not visible Approximately 1.6 ft. (0.5 m) using the outside rear view to 11.5 ft. (3.5 m) from either mirrors (the blind spots) side of the vehicle Vehicles that are approach- The area between the side of the...
  • Page 273 4-5. Using the driving support systems ● Following vehicles that are in the ■ The BSM function is operational same lane when ● Vehicles traveling 2 lanes away The BSM function is operational from your vehicle when all of the following conditions are met: ●...
  • Page 274 (if bicycle carrier) is installed to the equipped) or multimedia sys- rear of the vehicle • When the vehicle throws up water tem (if equipped) screen. or snow behind.  When the Toyota parking assist monitor (if equipped) is displayed...
  • Page 275 4-5. Using the driving support systems Example: Approach- Approxi- Speed ing vehicle mate alert distance 18 mph 65 ft. (20 Fast (28 km/h) 5 mph (8 18 ft. (5.5  When the panoramic view Slow km/h) monitor (if equipped) is dis- played ■...
  • Page 276 4-5. Using the driving support systems ● Guardrails, walls, signs, parked vehicles and similar stationary objects ● Small motorcycles, bicycles, pedestrians, etc. ● Vehicles moving away from your vehicle • When backing out of a shallow angle parking spot ● Vehicles approaching from the parking spaces next to your vehi- : Depending on conditions, detec-...
  • Page 277: Intuitive Parking Assist

    4-5. Using the driving support systems Intuitive parking assist : If equipped The distance from your vehicle to objects, such as a wall, when parallel parking • When the distance between your or maneuvering into a vehicle and metal objects, such as a guardrail, wall, sign, or parked garage is measured by the vehicle, which may reflect electri-...
  • Page 278 4-5. Using the driving support systems tion display and navigation sys- tem screen (if equipped) or multimedia system screen (if equipped) depending on the position and distance to the object.  Multi-information display • When the panoramic view moni- tor (if equipped) is displayed A graphic is shown when the pan- oramic view monitor is displayed.
  • Page 279 4-5. Using the driving support systems switch has been turned to OFF. ● A non-genuine Toyota suspen- sion (lowered suspension, etc.) WARNING is installed. ■ Intuitive parking assist pre- ● Towing eyelets are installed. cautions ● A backlit license plate is Observe the following precau- installed.
  • Page 280 Have Certain vehicle conditions and the the vehicle inspected by your surrounding environment may affect Toyota dealer. the ability of a sensor to correctly detect objects. Particular instances where this may occur are listed below.
  • Page 281 4-5. Using the driving support systems ● A sensor is covered in any way. ■ Certification (Canada only) ● When a sensor or the area around This ISM device complies with a sensor is extremely hot or cold. Canadian ICES-001. ●...
  • Page 282 4-5. Using the driving support systems may blink.) The images may differ from that shown in the illustrations.  Approximate distance to object • Front center sensor: 3.3 ft. (100 cm) to 2.0 ft. (60 cm) • Rear center sensor: 4.9 ft. (150 cm) to 2.0 ft. (60 cm) Multi-information display Navigation or multimedia system screen ...
  • Page 283 4-5. Using the driving support systems  Approximate distance to object: Less than 0.5 ft. (15 cm) Multi-information dis- Navigation or multimedia system screen play : The distance segments will blink rapidly. Buzzer operation and dis- • Your vehicle is moving away from ■...
  • Page 284: Pksb (Parking Support Brake)

    4-5. Using the driving support systems PKSB (Parking Sup- WARNING port Brake) ■ Limitations of the Parking Support Brake system : If equipped Do not overly rely on the system, as doing so may lead to an acci- The Parking Support Brake dent.
  • Page 285 4-5. Using the driving support systems Display and buzzer for NOTICE hybrid system output ■ If “PKSB Unavailable” is dis- played on the multi-informa- restriction control and tion display and the PKSB brake control OFF indicator illuminates If this message is displayed If the hybrid system output immediately after the power restriction control or brake con-...
  • Page 286 4-5. Using the driving support systems The system has determined that Buzzer: Short beep stronger-than-normal brake opera- tion is necessary. System overview Multi-information display: “BRAKE!” If the Parking Support Brake Head-up display: “BRAKE!” determines that a collision with a Navigation system or multimedia detected object is possible, the system screen: “BRAKE!”...
  • Page 287 4-5. Using the driving support systems Brake control begins operat- ing (System determines that possibility of collision with detected object is extremely high) ■ If the Parking Support Brake has operated If the vehicle is stopped due to oper- Hybrid system output ation of the Parking Support Brake, the Parking Support Brake will be Braking force...
  • Page 288: Parking Support Brake Function (Static Objects)

    Parking Support Brake the sensor was not dirty to begin function (static with, have the vehicle inspected at objects) your Toyota dealer. ● If “Parking Assist Unavailable” is displayed simultaneously, water : If equipped may be continuously flowing over...
  • Page 289 4-5. Using the driving support systems When traveling at a low When the vehicle moves in ■ ■ speed and the brake pedal the unintended direction is not depressed, or is due to the wrong shift posi- depressed late tion being selected When the accelerator pedal ■...
  • Page 290 Have the vehicle ■ When to disable the Parking inspected by your Toyota Support Brake dealer. In the following situations, disable the Parking Support Brake as the ■...
  • Page 291 4-5. Using the driving support systems mately 9 mph (15 km/h) or less. objects) differs from the detection • There is a static object in the trav- range of the intuitive parking assist eling direction of the vehicle and (P.280). Therefore, even if the approximately 6 to 13 ft.
  • Page 292 4-5. Using the driving support systems ■ Situations in which the Parking • When loaded on ships or trucks Support Brake function (static • Moving type automatic car wash objects) may operate even if • Lift type parking area or multi- there is no possibility of a colli- story parking lot sion...
  • Page 293 4-5. Using the driving support systems ■ Situations in which the Parking ● Other sonic waves sources Support Brake function (static • When vehicle horns, vehicle objects) may not operate prop- detectors, motorcycle engines, air erly brakes of large vehicles, the clear- ance sonar of other vehicles or In some situations, such as the fol- other devices which produce ultra-...
  • Page 294: Parking Support Brake Function (Rear-Crossing Vehicles)

    When reversing, a vehicle is ■ sor malfunction. Have the vehi- approaching and the brake cle inspected by your Toyota dealer. pedal is not depressed, or is depressed late ● Observe the rear radar sensor handling precautions.
  • Page 295 4-5. Using the driving support systems • The vehicle speed is approxi- ■ Detection area of the Parking mately 9 mph (15 km/h) or less. Support Brake function (rear- • Vehicles are approaching from the crossing vehicles) right or left at the rear of the vehi- The detection area of the Parking cle at a traveling speed of less Support Brake function (rear-cross-...
  • Page 296 4-5. Using the driving support systems ● Objects which are extremely close to a radar sensor ● Vehicles which are approaching from the right or left at the rear of the vehicle at a traveling speed of less than approximately 5 mph (8 km/h) ●...
  • Page 297 4-5. Using the driving support systems ● When equipment that may • When backing up on a slope with obstruct a sensor is installed, such a sharp change in grade as a towing eyelet, bumper pro- tector (an additional trim strip, etc.), bicycle carrier, or snow plow ●...
  • Page 298 4-5. Using the driving support systems many curves. Driving mode select When Sport mode is selected, switch Sport mode indicator comes on. Eco drive mode The driving modes can be Helps the driver accelerate in an selected to suit the driving eco-friendly manner and improve and usage conditions.
  • Page 299: Driving Assist Systems

    4-5. Using the driving support systems vated.) Driving assist systems To keep driving safety and performance, the following systems operate automati- cally in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when oper- ating the vehicle.
  • Page 300 4-5. Using the driving support systems VSC (Vehicle Stability Con- wheel ■ trol) E-Four (Electronic On- ■ Helps the driver to control skid- Demand AWD system) ding when swerving suddenly or Automatically switches from turning on slippery road sur- front wheel drive to all-wheel faces.
  • Page 301 TRAC is temporary deactivated. If the information continues to show, To turn the TRAC system off, contact your Toyota dealer. quickly press and release ■ Operating conditions of hill- start assist control...
  • Page 302 4-5. Using the driving support systems in the following cases, but it does ■ Operating conditions of Active not indicate that a malfunction has Cornering Assist occurred. The system operates when the fol- ● Operating sound heard from the lowing occurs. engine compartment when the ●...
  • Page 303 Toyota dealer immedi- ately. “AWD System Malfunc- A malfunction occurred in the AWD system. tion  Have your vehicle checked by your Toyota 2WD Mode Engaged dealer immediately. Visit Your Dealer” ■ Stopping distance when the...
  • Page 304 Active Cor- different tires are installed on the vehicle. nering Assist may temporarily Contact your Toyota dealer for stop operating to ensure proper further information when replacing operation of the brakes, TRAC tires or wheels.
  • Page 305: 4-6. Driving Tips

    4-6. Driving tips system, etc., the hybrid battery Hybrid vehicle driving 4-6.Driving tips (traction battery) power is con- tips sumed. For economical and ecolog- Accelerator pedal/brake ical driving, pay attention to pedal operation the following points:  Drive your vehicle smoothly. Using Eco drive mode Avoid abrupt acceleration and deceleration.
  • Page 306 4-6. Driving tips When driving in a traffic jam, avoiding overuse of the heater. gently release the brake pedal to allow the vehicle to move for- Checking tire inflation ward slightly while avoiding pressure overuse of the accelerator Make sure to check the tire infla- pedal.
  • Page 307: Winter Driving Tips

    225/55R19 tires. ■ Repairing or replacing snow tires WARNING Request repairs or replacement of snow tires from your Toyota ■ Driving with snow tires dealer or legitimate tire retailers. Observe the following precautions This is because the removal and to reduce the risk of accidents.
  • Page 308 Accelerate the vehicle slowly, shift lock system. Have the vehi- keep a safe distance between cle inspected by your Toyota you and the vehicle ahead, and dealer immediately. drive at a reduced speed suit- able to road conditions.
  • Page 309 4-6. Driving tips Regulations on the use of WARNING tire chains (except ■ When parking the vehicle 225/55R19 tires) When parking the vehicle without applying the parking brake, make Regulations regarding the use sure to chock the wheels. If you do not chock the wheels, the vehi- of tire chains vary depending on cle may move unexpectedly, pos-...
  • Page 310: Utility Vehicle Precautions

    4-6. Driving tips Utility vehicle precau- WARNING tions ■ Utility vehicle precautions Always observe the following pre- cautions to minimize the risk of This vehicle belongs to the death or serious injury or damage utility vehicle class, which to your vehicle: has higher ground clear- ●...
  • Page 311 4-6. Driving tips be driven off-road. However, in • State and Local Parks and Recre- ation Departments the event that off-road driving • State Motor Vehicle Bureau cannot be avoided, please • Recreational Vehicle Clubs • U.S. Forest Service and Bureau of observe the following precau- Land Management tions to help avoid the areas...
  • Page 312 4-6. Driving tips ■ Inspection after off-road driv- WARNING ● When driving off-road or in rug- ● Sand and mud that has accu- ged terrain, do not drive at mulated around brake discs excessive speeds, jump, make may affect braking efficiency sharp turns, strike objects, etc.
  • Page 313: Interior Features

    5-3. Using the storage features List of storage features Luggage compartment fea- tures ......5-4. Using the other interior features Toyota multi-operation touch (vehicle with the 12.3-inch display) ..Panoramic fixed moon roof with one-touch frosted glass control ....Other interior features .
  • Page 314 5-1. Using the air conditioning system and defogger Automatic air conditioning system (vehicles with 5-1.Using the air conditioning system and defogger 8-inch display) Air outlets and fan speed are automatically adjusted accord- ing to the temperature setting. Air conditioning controls Automatic mode switch Left-hand side temperature control knob Right-hand side temperature control knob...
  • Page 315 5-1. Using the air conditioning system and defogger ture. Switching between outside ■ air and recirculated air If the “A/C” switch is not pressed, modes the system will blow ambient tem- perature air or heated air. Press the outside/recirculated Setting the fan speed air mode switch.
  • Page 316 5-1. Using the air conditioning system and defogger may switch automatically.) switch is turned to ON. ● It is possible to switch to outside To defog the windshield and the air mode at any time by pressing side windows quickly, turn the air the outside/recirculated air mode flow and temperature up.
  • Page 317 5-1. Using the air conditioning system and defogger • Engine speed and compressor attached to the hood at the loca- operation controlled to restrict tion shown in the following illustra- tion. heating/cooling capacity • Fan speed restricted when auto- matic mode is selected ●...
  • Page 318 Have repair/replacement per- press the “SYNC” switch again. formed by your Toyota dealer. When a part of the air condition- When the “SYNC” mode is on, the ing system, such as the evapora- indicator illuminates on the “SYNC”...
  • Page 319 5-1. Using the air conditioning system and defogger  The windshield defogger is ■ Operation of manual airflow control not operating Even if the function is manually switched to directing airflow to only While operating, illumi- the front seats, when a rear seat is occupied, it may automatically direct nates.
  • Page 320 5-1. Using the air conditioning system and defogger Rear  Air outlet layout and oper- ations Location of air outlets ■ The air outlets and air volume change according to the selected air flow mode. Direct air flow to the left or right, up or down Open the vent Close the vent...
  • Page 321: Automatic Air Conditioning System (Vehicles With 12.3-Inch Display)

    The air conditioning system can be operated using the air conditioning control panel and air conditioning control screen on the Toyota multi-operation touch. For details about Toyota multi-operation touch, refer to P.345. Air conditioning controls Left-hand side temperature control switches...
  • Page 322 5-1. Using the air conditioning system and defogger Eco air conditioning mode switch “SYNC” switch “A/C” switch Automatic mode switch Windshield defogger switch Rear window and outside rear view mirror defoggers switch “OFF” switch Adjusting the temperature speed increase switch on the air ■...
  • Page 323 5-1. Using the air conditioning system and defogger Switching between outside control panel. ■ air and recirculated air Set the outside/recirculated air modes mode switch to outside air mode if the recirculated air mode is used. (It Select the outside/recirculated may switch automatically.) air mode switch on the air condi- To defog the windshield and the...
  • Page 324 5-1. Using the air conditioning system and defogger When the function is on, the indica- ● The windows may fog up if the recirculated air mode is used. tor illuminates on the screen. ■ When driving on dusty roads Close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake...
  • Page 325 5-1. Using the air conditioning system and defogger air conditioning mode switch. ing: • A card that has metal on it, such ■ Notes on touch switch opera- as aluminum foil, etc. tion • A pack of cigarettes that use alu- ●...
  • Page 326 5-1. Using the air conditioning system and defogger ● When parking, the system auto- The air conditioning system cannot matically switches to outside air be operated while these operations mode to encourage better air cir- are performed. culation throughout the vehicle, Press and hold both the fan helping to reduce odors that occur speed decrease switch and auto-...
  • Page 327 5-1. Using the air conditioning system and defogger and outside rear view mirror defog- switch and automatic mode switch inform the current setting. gers switch Operation Indicator on the windshield sounds defogger switch Not illumi- Indicator on the automatic mode Blinks nated switch...
  • Page 328 5-1. Using the air conditioning system and defogger The driver’s side temperature con- NOTICE trol switches can be used to adjust ■ To prevent 12-volt battery dis- the temperature for the driver’s and charge passenger’s side. To enter individ- Do not leave the air conditioning ual mode, operate the passenger’s system on longer than necessary side temperature control switches...
  • Page 329 5-1. Using the air conditioning system and defogger operation. When the mode has Windshield wiper de-icer been switched manually, auto- (if equipped) matic airflow control stops oper- ating. This feature is used to prevent ice from building up on the wind- Select on the option control shield and wiper blades.
  • Page 330 5-1. Using the air conditioning system and defogger WARNING ■ To not interrupt the wind- shield defogger from operat- Do not place anything on the instrument panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers from defog- ging.
  • Page 331: Heated Steering * Wheel /Seat Heat- * Ers * /Seat Ventilators

    5-1. Using the air conditioning system and defogger Heated steering NOTICE wheel /seat heat- ■ To prevent damage to the /seat ventilators seat heaters and seat ventila- tors Do not put heavy objects that : If equipped have an uneven surface on the ...
  • Page 332 Do not cover the seat with a blanket or cushion when using the seat heater. ● Do not use seat heater more than necessary. Using the Toyota multi- ■ Operating the seat venti- operation touch (if lators equipped) Using the seat ventilator ■...
  • Page 333 When a seat ventilator is set to Hi, the fan speed of the seat ventilator may increase according to the fan speed of the air conditioning sys- tem. Using the Toyota multi- ■ operation touch (if equipped) Select to display the seat climate screen.
  • Page 334: 5-2. Using The Interior Lights

    5-2. Using the interior lights Interior lights list 5-2.Using the interior lights Location of the interior lights Rear interior light (P.336) Door courtesy lights Inside door handle lights (if equipped) Power switch illumination (P.196) Front interior lights/personal lights (P.335, 336) Front cup holder light Instrument panel lower illumination (if equipped) Footwell lights (if equipped)
  • Page 335 5-2. Using the interior lights tronic key, whether the doors are NOTICE locked/unlocked, and whether the doors are opened/closed. ■ To prevent 12-volt battery dis- charge ● If the interior lights remain on when the power switch is turned to Do not leave the lights on longer OFF, the lights will go off automat- than necessary when the hybrid...
  • Page 336 5-2. Using the interior lights Vehicles with panoramic fixed Vehicles with panoramic fixed   moon roof with one-touch moon roof with one-touch frosted glass control frosted glass control Turns the door position on/off The front and rear interior lights Vehicles without panoramic ...
  • Page 337 5-2. Using the interior lights Vehicles without panoramic  fixed moon roof with one- touch frosted glass control Vehicles with panoramic fixed  moon roof with one-touch frosted glass control...
  • Page 338: 5-3. Using The Storage Features

    5-3. Using the storage features List of storage features 5-3.Using the storage features Location of the storage features Bottle holders (P.340) Console box (P.339) Cup holders (P.339) Glove box (P.338) Open tray (P.341) ● Lighters or spray cans may WARNING explode.
  • Page 339 5-3. Using the storage features side of the tray facing toward the front of the vehicle. ● The spacers in the front cup hold- ers can be stowed. (P.340) WARNING ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
  • Page 340 5-3. Using the storage features ■ When using the front cup ■ Front cup holders holders ● The spacers in the front cup hold- Observe the following precau- ers can be removed. tions. The front cup holder can also be Failure to do so may cause stowed items or spacers etc.
  • Page 341: Luggage Compartment Fea- Tures

    5-3. Using the storage features ● The bottle may not be stored Luggage compart- depending on its size or shape. ment features NOTICE Deck board ■ Items that should be not stowed in the bottle holders Open the back door. Do not place open bottles or glass and paper cups containing liquid in the bottle holders.
  • Page 342 5-3. Using the storage features opening or head restraint as NOTICE shown in the illustration. ■ When closing the back door Do not leave the hook secured on the upper edge of the back door opening. The deck board may get dam- aged.
  • Page 343 5-3. Using the storage features Compress the end of the lug- Luggage cover gage cover and lift the lug- Installing the luggage cover gage cover up. ■ Compress the both ends of the luggage cover and insert into the recess to install. Stowing the luggage cover ■...
  • Page 344 5-3. Using the storage features Attach the side deck covers and close the deck board. When taking out the luggage cover, reverse the steps listed. WARNING ■ Luggage cover ● When installing/stowing the lug- gage cover, make sure that the luggage cover is securely installed/stowed.
  • Page 345: 5-4. Using The Other Interior Features

    (P.99, The displayed function can also be 110) changed by performing an up or : Refer to the “NAVIGATION AND down flick operation on the Toyota MULTIMEDIA SYSTEM multi-operation touch. OWNER’S MANUAL”. Toyota multi-operation touch operation Moving screens on the ■...
  • Page 346 5-4. Using the other interior features displayed position on the Toyota Systems Limited. All rights multi-operation touch. reserved. The screen position can also be changed by perform a left or right flick operation on a screen. Displaying a screen in full ■...
  • Page 347: Panoramic Fixed Moon Roof With One-Touch Frosted Glass Control

    5-4. Using the other interior features Changing the moon roof ■ Panoramic fixed moon between opaque and trans- roof with one-touch parent frosted glass control Press the dimming switch. : If equipped The moon roof is changed between Use the overhead switches opaque and transparent each time the dimming switch is pressed.
  • Page 348 If the switch is released at the incor- one-touch frosted glass control may rect time, the procedure will have to be malfunctioning. Have the vehicle be performed again from the begin- inspected by your Toyota dealer ning. immediately. If the automatic opening and closing ■...
  • Page 349: Other Interior Features

    5-4. Using the other interior features Other interior features WARNING ■ Opening and closing the elec- tronic sunshade Sun visors ● Check to make sure that all pas- sengers do not have any part of their body in a position where it could be caught when the elec- tronic sunshade is being oper- ated.
  • Page 350 5-4. Using the other interior features the power switch is turned to OFF, NOTICE the lights will go off automatically after 20 minutes. ■ When power outlet is not in NOTICE To avoid damaging the power out- let, close the power outlet lid ■...
  • Page 351 5-4. Using the other interior features ● Do not apply excessive force to or impact the USB charging ports. ● Do not disassemble or modify the USB charging ports. ■ To prevent damage to exter- nal devices ● Do not leave external devices in the vehicle.
  • Page 352 5-4. Using the other interior features The “Qi” symbol switch is memorized. ■ The “Qi” symbol is a trademark of the Wireless Power Consor- tium. Place the charging side of the portable device down. Name for all parts ■ When charging, the operation indi- cator light (orange) comes on.
  • Page 353 (comes forming the ing the portable device) above proce- Charging dure, contact your Toyota : Depending on the portable dealer. device, there are cases where the operation indicator light will con- • Repeatedly flashes 3 times tinue being lit up orange even continuously (Orange) after the charging is complete.
  • Page 354 5-4. Using the other interior features • Repeatedly flashes 4 times the charger can be changed and the noise can be reduced.Also, on that continuously (Orange) occasion, the operation indicator light will flash orange 2 times. Suspected Handling method ■ Important points of the wireless causes charger...
  • Page 355 5-4. Using the other interior features ■ Certification for the wireless charger...
  • Page 356 5-4. Using the other interior features...
  • Page 357 5-4. Using the other interior features WARNING ■ Caution while driving When charging a portable device, for safety reasons, the driver should not operate the main part of the portable device while driv- ing.
  • Page 358 5-4. Using the other interior features WARNING NOTICE ■ Caution regarding interfer- ■ Conditions in which the func- ence with electronic devices tion may not operate cor- rectly People with implantable cardiac pacemakers, cardiac resynchroni- In the following conditions, it may zation therapy-pacemakers or not operate correctly implantable cardioverter defibrilla-...
  • Page 359 Rear ■ the wireless charger is malfunc- tioning. Contact authorized Fold down the armrest for use. Toyota dealer. ■ To prevent failure or damage to data ● Do not bring magnetic cards, such as a credit card, a contact-...
  • Page 360 5-4. Using the other interior features WARNING ■ Items that must not be hanged on the hook Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield air- bags deploy, these items may become projectiles, causing death or serious injury.
  • Page 361: Garage Door Opener

    5-4. Using the other interior features operating. Garage door opener Buttons : If equipped Vehicles with Digital Rear-  The garage door opener can view Mirror be programmed using the ® HomeLink to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices.
  • Page 362 ■ When support is necessary WARNING Visit on the web at When programming a garage ■ www.homelink.com/toyota or call 1- door or other remote control 800-355-3515. device The garage door or other device may operate, so ensure people and objects are out of danger to...
  • Page 363 5-4. Using the other interior features you may need a stepladder or WARNING other sturdy, safe device to ■ Conforming to federal safety reach the “Learn” or “Smart” standards button on the garage door ® Do not use the HomeLink com- opener motor.
  • Page 364 5-4. Using the other interior features Point the remote control Programming an entry gate  transmitter for the device at (for U.S.A. owners)/Program- the rear view mirror, 1 to 3 in. ming a device in the Cana- (25 to 75 mm) from the dian market ®...
  • Page 365 5-4. Using the other interior features Repeat the steps above to Press and hold the desired program another device for ® HomeLink button (inside the any of the remaining vehicle) for 2 seconds and ® HomeLink buttons. release it. Repeat this sequence Programming a rolling code ■...
  • Page 366 5-4. Using the other interior features Within 5 seconds after pro- Reprogramming a single ■ gramming the garage door ® HomeLink button opener has been completed, When the following procedure is if the garage door opener performed, buttons which motor is trained to already have devices registered ®...
  • Page 367 5-4. Using the other interior features Vehicles with auto anti-glare  Color Status inside rear view mirror Opening/closing Green has completed Feedback sig- Red (flashing) nals cannot be received The indicators can operate within approximately 820 ft. (250 m) of the garage door. However, if there are obstructions Opening between the garage door and...
  • Page 368 5-4. Using the other interior features If you sell your vehicle, be sure to erase the programs stored in the ® HomeLink memory.
  • Page 369: Maintenance And Care

    Maintenance and care 6-1. Maintenance and care Headlight aim ....Cleaning and protecting the Exterior lights ....vehicle exterior ..Cleaning and protecting the vehicle interior ... 6-2. Maintenance Maintenance requirements ........General maintenance.. Emission inspection and maintenance (I/M) pro- grams ......
  • Page 370 6-1. Maintenance and care scratch and outside temperature. Cleaning and protect- 6-1.Maintenance and care The restoration time may become ing the vehicle exte- shorter when the coating is rior warmed by applying warm water. ● Deep scratches caused by keys, coins, etc.
  • Page 371 6-1. Maintenance and care ● Wash detergent off with water WARNING immediately after use. ■ When washing the vehicle ● To protect the paint from damage, make sure to observe the follow- Do not apply water to the inside of ing precautions.
  • Page 372 If the paint of the rear bumper is Wax may cause damage to the chipped or scratched, the system lenses. may malfunction. If this occurs, consult your Toyota dealer. ■ Cleaning the radiator grille Observe the following precautions to avoid damage to the radiator NOTICE grille surface.
  • Page 373: Cleaning And Protecting The Vehicle Interior

    6-1. Maintenance and care Cleaning and protect- NOTICE ing the vehicle interior ■ When using a high pressure car wash ● When washing the vehicle, do Perform cleaning in a man- not let water from the high-pres- ner appropriate to each sure washer directly hit the component and its material.
  • Page 374 6-1. Maintenance and care damage to the UV protective coat- NOTICE ing, observe the following: ■ Cleaning detergents ● If the windows are dirty, gently wipe them with a cloth soaked in ● Do not use the following types water or lukewarm water as soon of detergent, as they may dis- as possible.
  • Page 375 It may dam- age the coating. ■ Caring for leather areas Toyota recommends cleaning the Cleaning the areas with interior of the vehicle at least twice a satin-finish metal accents year to maintain the quality of the (if equipped) vehicle’s interior.
  • Page 376 6-1. Maintenance and care from the cloth and thoroughly wipe off remaining traces of detergent and water.
  • Page 377: Maintenance

    ■ Repair and replacement other reproductive harm. Avoid It is recommended that genuine exposure and wash any Toyota parts be used for repairs to affected area immediately. ensure performance of each sys- ● 12-volt battery posts, terminals tem. If non-Toyota parts are used in...
  • Page 378 Vehicles with 4.2-inch display  The use of Toyota Repair Manuals Press of the meter is recommended. control switches and select For details about warranty cover- on the multi-information display.
  • Page 379: General Maintenance

    Is there sufficient is recommended that any Washer fluid washer fluid? (P.393) problem you notice should be brought to the attention of your Toyota dealer or Luggage compartment qualified service shop for advice. Items Check points Check the connec- WARNING 12-volt battery tions.
  • Page 380 6-2. Maintenance Items Check points Items Check points • Does the brake • Does the park- pedal move ing brake oper- smoothly? ate normally? • Does the brake • When parked on pedal have Parking brake a slope and the appropriate parking brake is Brake pedal...
  • Page 381: Emission Inspection And Maintenance (I/M) Programs

    I/M test and may need Tires • Have the tires to be repaired. Contact your been rotated according to the Toyota dealer to service the maintenance vehicle. schedule? • The wheel nuts Your vehicle may not should not be pass the I/M test in the fol- loose.
  • Page 382 The error code in the OBD sys- tem will not be cleared unless the vehicle is driven 40 or more times. If your vehicle does not pass the I/M test Contact your Toyota dealer to prepare the vehicle for re-test- ing.
  • Page 383: 6-3. Do-It-Yourself Maintenance

    6-3. Do-it-yourself maintenance Do-it-yourself service 6-3.Do-it-yourself maintenance Items Parts and tools precautions • “Toyota Super Long Life Cool- ant” or a similar If you perform maintenance high quality eth- by yourself, be sure to fol- ylene glycol-based low the correct procedure as non-silicate, non- given in these sections.
  • Page 384 6-3. Do-it-yourself maintenance Items Parts and tools ● Do not leave anything that may burn easily, such as paper and Hybrid bat- rags, in the engine compart- • Vacuum cleaner, tery (traction ment. etc, battery) air • Phillips screw- ● Do not smoke, cause sparks or intake vent expose an open flame to fuel or...
  • Page 385: Hood

    6-3. Do-it-yourself maintenance Hold the hood open by insert- Hood ing the supporting rod into the slot. Release the lock from the inside of the vehicle to open the hood. Opening the hood Pull the hood lock release lever. The hood will pop up slightly. WARNING ■...
  • Page 386: Positioning A Floor Jack

    6-3. Do-it-yourself maintenance Positioning a floor NOTICE jack ■ When closing the hood Be sure to return the support rod to its clip before closing the hood. When using a floor jack, fol- Closing the hood without return- low the instructions in the ing the support rod properly could manual provided with the cause the hood to bend.
  • Page 387 6-3. Do-it-yourself maintenance Rear ■...
  • Page 388: Engine Compartment

    6-3. Do-it-yourself maintenance Engine compartment Components Fuse boxes (P.427) Engine oil filler cap (P.389) Engine oil level dipstick (P.388) Brake fluid reservoir (P.392) Radiator (P.392) Electric cooling fan Condenser (P.392) Power control unit coolant reservoir (P.391) Washer fluid tank (P.393) Engine coolant reservoir (P.391) Checking and adding the ■...
  • Page 389 6-3. Do-it-yourself maintenance check the oil level on the dip- The shape of the dipstick may differ depending on the type of vehicle or stick. engine. Checking the engine oil ■ Wipe the dipstick and reinsert Park the vehicle on level it fully.
  • Page 390 Do not dispose of used control switches and select oil and filters in household trash, on the multi-information display. in sewers or onto the ground. Call your Toyota dealer, service Press of the meter station or auto parts store for control switches and select information concerning recy- “Vehicle Settings”.
  • Page 391 (P.476) Checking the coolant ■ Coolant selection The coolant level is satisfactory Only use “Toyota Super Long Life if it is between the “FULL” and Coolant” or a similar high quality “LOW” lines on the reservoir ethylene glycol based non-silicate, when the hybrid system is cold.
  • Page 392 If either of the above parts is extremely dirty or you are not sure of their condition, have Adding fluid ■ your vehicle inspected by your Slide and lift up the rubber Toyota dealer. strip to partly remove it, and...
  • Page 393 6-3. Do-it-yourself maintenance then remove the clip remove item. it as shown in the illustration. FMVSS No.116 DOT 3 or SAE J1703 brake fluid Fluid type FMVSS No.116 DOT 4 or SAE J1704 Item Clean funnel ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of brak-...
  • Page 394: 12-Volt Battery

    6-3. Do-it-yourself maintenance fluid. 12-volt battery Location The 12-volt battery is located in the right-hand side of luggage compartment. WARNING ■ When adding washer fluid Do not add washer fluid when the hybrid system is hot or operating as washer fluid contains alcohol and may catch fire if spilled on the hybrid system, etc.
  • Page 395 Toyota dealer. ity. WARNING ● If electrolyte gets on your skin Wash the affected area thor- ■...
  • Page 396 6-3. Do-it-yourself maintenance Disengage the 6 claws and WARNING pull the 12-volt battery cover ■ When there is insufficient 12- to remove it. volt battery fluid Do not use if there is insufficient fluid in the 12-volt battery. There is a possible danger that the 12- volt battery may explode.
  • Page 397: Tires

    Red: Charging is necessary. tors are showing on the tires. Have the vehicle inspected Also check the tires for uneven by your Toyota dealer. wear, such as excessive wear Clear: Replacement is nec- on one side of the tread. essary.
  • Page 398 If you are not sure, consult with your be adequate for driving in most win- Toyota dealer. ter conditions as well as for use ■ Tire life year-round. All season tires, how-...
  • Page 399 Do not mix differently con- structed tires (radial, bias-belted To equalize tire wear and extend or bias-ply tires). tire life, Toyota recommends that tire rotation is carried out at the ● Do not mix summer, all season same interval as tire inspection.
  • Page 400 6-3. Do-it-yourself maintenance tem can be displayed on the OFF. If the tires are rotated while the power switch is in ON, the tire multi-information display. position information will not be updated. If this accidentally occurs, The unit can be changed. either turn the power switch to OFF Vehicles with 4.2-inch display ...
  • Page 401 In the following cases, the tire control switches on the steer- pressure warning system may not operate properly. ing wheel and select • If non-genuine Toyota wheels are used. Press of the meter • A tire has been replaced with a...
  • Page 402 6-3. Do-it-yourself maintenance cellular phone, cordless phone or a tire has burst, the warning may other wireless communication not function. device ■ Warning performance of the tire If tire position information is not cor- pressure warning system rectly displayed due to the radio The warning of the tire pressure wave conditions, the display may be warning system will change in...
  • Page 403 ID codes must be ters, contact your Toyota dealer registered in the tire pressure as the tire pressure warning valves and transmitters may be...
  • Page 404 6-3. Do-it-yourself maintenance tion pressure level. The tire NOTICE pressure warning system will oper- ate based on this pressure level. ● When replacing tire valve caps, do not use tire valve caps other Start the hybrid system. than those specified. The cap may become stuck.
  • Page 405 6-3. Do-it-yourself maintenance display. Press of the meter Even if the vehicle is not driven at control switches, select the approximately 25 mph (40 km/h) or “Setting Pressure”. Then more, initialization can be com- pleted by driving for a long time. press and hold However, if initialization does not complete after driving for 1 hour or...
  • Page 406 If initialization cannot be completed light will come on. after performing the above proce- ■ If the tire pressure warning sys- dure, contact your Toyota dealer. tem is not initialized properly ● In the following situations, initial- ization may take longer than usual...
  • Page 407 6-3. Do-it-yourself maintenance unique ID code. When replacing mation display. a tire pressure warning valve and transmitter, it is necessary to register the ID code. When registering the ID codes, perform the following procedure. Vehicles with 4.2-inch display  Park the vehicle in a safe place, wait for approximately Drive straight (with occa- 20 minutes, and then start...
  • Page 408 6-3. Do-it-yourself maintenance information display. “ Vehicle Settings”, and Even if the vehicle is not driven at then press approximately 25 mph (40 km/h) or more, registration can be com- Press of the meter pleted by driving for a long time. However, if registration does not control switches and select complete after driving for 1 hour or...
  • Page 409 ● In the following situations, ID code above procedure, contact your registration may take longer than Toyota dealer. usual to be completed or may not be possible. Normally, registra- Selecting wheel set tion completes within approxi- mately 30 minutes.
  • Page 410 6-3. Do-it-yourself maintenance  Only a change between both registered wheel set is possi- ble, mixing between these wheel sets is not supported. How to change between ■ wheel sets Have the vehicle fitted with the preferred wheel set. After 2 minutes, registration of a Vehicles with 4.2-inch display ...
  • Page 411 6-3. Do-it-yourself maintenance approximately 25 mph “ Vehicle Settings”, and (40km/h) or more for approxi- then press mately 10 to 30 minutes. Press of the meter Registration of a second wheel set control switches and select is complete when the tire pressure warning light turns off and the infla- “TPWS setting”, and then tion pressure of each tire is dis-...
  • Page 412: Tire Inflation Pressure

    Make sure to maintain the proper tire inflation pres- sure. Tire inflation pressure should be checked at least once per month. However, Toyota recommends that tire inflation pressure be checked once every two weeks. (P.485) Tire valve Checking the specified...
  • Page 413 ● Uneven wear ● Damage to the drive train If a tire needs frequent inflating, ● Poor handling have it checked by your Toyota dealer. ● Possibility of blowouts resulting from overheated tires ■ Instructions for checking tire inflation pressure ●...
  • Page 414: Wheels

    In addition, the oil or grease can Replacement wheels are avail- cause the wheel nuts to loosen able at your Toyota dealer. and the wheel may fall off, caus- ing an accident and resulting in : Conventionally referred to as off- death or serious injury.
  • Page 415: Air Conditioning Filter

    Turn the power switch off. ters at your Toyota dealer. Open the glove box and slide ● Ensure that only genuine off the damper. Toyota wheels are used on your vehicle. Tire pressure warning valves and transmitters may not work properly with non-genuine wheels.
  • Page 416 6-3. Do-it-yourself maintenance With the glove box fully open, Remove the filter case. slightly lift up the glove box and pull toward the seat to detach the bottom of the glove box. Do not use excessive force if the glove box does not detach when lightly pulled.
  • Page 417: Cleaning The Hybrid Battery (Traction Battery) Air Intake Vent And Filter

    6-3. Do-it-yourself maintenance Cleaning the hybrid NOTICE battery (traction bat- ■ When using the air condition- tery) air intake vent ing system and filter Make sure that a filter is always installed. Using the air condition- ing system without a filter may To prevent the fuel econ- cause damage to the system.
  • Page 418 6-3. Do-it-yourself maintenance the filter. If dust and clogs cannot be completely removed If dust and clogs cannot be com- pletely removed with the air intake vent cover installed, remove the cover and clean the filter. Turn the power switch off. Using a Phillips screwdriver, Disengage the claws in the order of remove the clip.
  • Page 419 Improper handling of the air intake vent cover and filter may result in damage to them. If you have any concerns about cleaning the filter, contact your Toyota dealer. ■ If “Maintenance Required for Traction Battery Cooling Parts See Owner’s Manual” is shown on the multi-information display ●...
  • Page 420 (P.73) filter so that it will not be dam- aged. If the filter is damaged, have it replaced with a new filter by your Toyota dealer. ● Make sure to reinstall the filter and cover to their original posi- tions after cleaning.
  • Page 421: Wiper Insert Replacement

    6-3. Do-it-yourself maintenance Wiper insert replace- NOTICE ment ■ If “Maintenance Required for Traction Battery Cooling Parts See Owner’s Manual” is When replacing the wiper shown on the multi-informa- insert, perform the following tion display procedure to operate each If the vehicle is continuously driven with the warning message wiper.
  • Page 422 6-3. Do-it-yourself maintenance driver with a rag. Stopper Claw Remove the 2 metal plates from the wiper insert pulled out, and install the plates to a new wiper insert. Make sure that the cutout location and warp direction of the metal blades are same as the original.
  • Page 423 6-3. Do-it-yourself maintenance the claw detaches, and then install them to the replace- remove the wiper blade from ment wiper insert. the wiper arm. Insert the wiper insert starting Pull the wiper insert out past from the claw at the center of the stopper on the wiper the wiper blade.
  • Page 424 Improper handling may result in damage to the wiper blades or wiper insert. If you have any concerns about replacing the wiper blades or wiper insert yourself, contact your Toyota dealer. NOTICE ■ When lifting the windshield wipers ●...
  • Page 425: Electronic Key Battery

     Lithium battery CR2450 ■ Use a CR2450 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. Remove the depleted battery ● Replace only with the same or using a small flathead screw- equivalent type recommended by driver.
  • Page 426 Toyota dealer. ● If you accidentally swallow a battery or put a battery into a part of your body, get emer- gency medical attention imme- diately.
  • Page 427: Checking And Replacing Fuses

    6-3. Do-it-yourself maintenance Checking and replac- ing fuses If any of the electrical com- ponents do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Left side instrument panel  Remove the lid. Checking and replacing fuses Turn the power switch off.
  • Page 428 6-3. Do-it-yourself maintenance Type A  Remove the cover Normal fuse Blown fuse Type B  Remove the fuse. Only type A fuse can be removed using the pullout tool. Normal fuse Blown fuse Type C  Check if the fuse is blown. Replace the blown fuse with a new fuse of an appropriate amperage rating.
  • Page 429 Have the cause of electrical over- load determined and repaired by ● If the lights do not turn on even your Toyota dealer as soon as after the fuse has been replaced, possible. a lights may need replacement. (P.431) ■...
  • Page 430: Headlight Aim

    If the headlight cannot be adjusted  Make sure the vehicle has a using this procedure, take the vehi- full tank of gasoline and the cle to your Toyota dealer to adjust the headlight aim. area around the headlight is not deformed.
  • Page 431: Exterior Lights

    (vehicles without panoramic view monitor) each consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ■ Condensation build-up on the inside of the lens...
  • Page 432 6-3. Do-it-yourself maintenance...
  • Page 433: When Trouble Arises

    When trouble arises 7-1. Essential information Emergency flashers ..If your vehicle has to be stopped in an emergency ........If the vehicle is trapped in rising water....7-2. Steps to take in an emer- gency If your vehicle needs to be towed......
  • Page 434: Emergency Flashers

    7-1. Essential information sion.) Emergency flashers 7-1.Essential information The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Operating instructions Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
  • Page 435: If Your Vehicle Has To Be Stopped In An Emergency

    7-1. Essential information briefly 3 times or more in suc- If your vehicle has to cession. be stopped in an emer- gency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehi- cle using the following pro- cedure: Stop the vehicle in a safe...
  • Page 436: If The Vehicle Is Trapped In Rising Water

     Remove the seat belt first. ter the windshield as it is lami- nated glass.  If the door can be opened, : Contact your Toyota dealer, or open the door and exit the aftermarket accessory manu- vehicle. facturer for further information ...
  • Page 437: 7-2. Steps To Take In An Emergency

    Toyota dealer or commer- of the motor may cause a fire to cial towing service, using a occur depending on the nature of wheel-lift type truck or flat- the damage or malfunction.
  • Page 438 The following may indicate a ■ Towing with a sling-type problem with your transmission. truck Contact your Toyota dealer or Do not tow with a sling-type truck commercial towing service to prevent body damage. before towing.  The hybrid system warning...
  • Page 439 7-2. Steps to take in an emergency Take out the wheel nut Using a flatbed truck wrench and towing eyelet. (P.458) When using a flat-bed truck to transport the vehicle, use tire Remove the eyelet cover strapping belts. Refer to the using a flathead screwdriver.
  • Page 440: If You Think Something Is Wrong

    If you notice any of the fol- lowing symptoms, your vehicle probably needs adjustment or repair. Con- tact your Toyota dealer as soon as possible. Visible symptoms Securely attach cables or  Fluid leaks under the vehicle chains to the towing eyelet.
  • Page 441 7-2. Steps to take in an emergency side when braking  Vehicle pulls heavily to one side when driving on a level road  Loss of brake effectiveness, spongy feeling, pedal almost touches the floor...
  • Page 442: If A Warning Light Turns On Or A Warning Buzzer Sounds

    Indicates a malfunction in:  The parking brake system;  The regenerative braking system; or  The electronically controlled brake system (Yellow)  Have the vehicle inspected by your Toyota dealer immediately. Charging system warning light ■ Warning light Details/Actions Indicates a malfunction in the vehicle’s charging...
  • Page 443  The hybrid system;  The electronic engine control system; (U.S.A.)  The electronic throttle control system; or  The emission control system (if equipped)  Have the vehicle inspected by your Toyota (Canada) dealer immediately. SRS warning light ■...
  • Page 444 ■ Warning light Details/Actions Indicates a malfunction in:  The ABS; or (U.S.A.)  The brake assist system  Have the vehicle inspected by your Toyota dealer immediately. (Canada) Electric power steering system warning light (warning ■ buzzer) Warning light...
  • Page 445 Warning light Details/Actions When a buzzer sounds: Indicates a malfunction in the Intuitive parking assist function  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: (Flashes) Indicates that the system is temporarily unavail-...
  • Page 446 Details/Actions When a buzzer sounds: Indicates a malfunction in the RCTA (Rear Cross Traffic Alert) function  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: (If equipped) Indicates that the rear bumper around the radar sensor is covered with dirt, etc.
  • Page 447  Release the accelerator pedal and depress the brake pedal. Indicates a malfunction in the Brake Override System (with warning buzzer)  Have the vehicle inspected by your Toyota dealer immediately. Drive-Start Control Indicates that the shift position was changed and Drive-Start Control was operated while depressing the accelerator pedal.
  • Page 448 Details/Actions When the light comes on after blinking for approximately 1 minute: Malfunction in the tire pressure warning system  Have the system checked by your Toyota dealer. When the light comes on: Low tire inflation pressure such as  Natural causes ...
  • Page 449 7-2. Steps to take in an emergency Driver’s and front passenger’s seat belt reminder light (warn- ■ ing buzzer Warning light Details/Actions Warns the driver and/or front passenger to fas- ten their seat belts  Fasten the seat belt. If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off.
  • Page 450 If the light does not go off even after The tire pressure warning light may several trips, contact your Toyota come on due to natural causes such dealer as soon as possible. as natural air leaks and tire inflation ■...
  • Page 451 Check the tires. If a tire is P.401 flat, change it with the spare tire and have the flat tire repaired by WARNING the nearest Toyota dealer. ■ If a warning light comes on or ● Avoid abrupt maneuvering and a warning buzzer sounds braking.
  • Page 452 7-2. Steps to take in an emergency Your vehicle has also been WARNING equipped with a TPMS (tire pres- As an added safety feature, your sure warning system) malfunc- vehicle has been equipped with a tion indicator to indicate when the tire pressure monitoring system system is not operating properly.
  • Page 453: If A Warning Message Is Displayed

    To prevent the shift lever from being performed, contact your operated incorrectly or the vehicle Toyota dealer. from moving unexpectedly, a mes- sage that requires shifting the shift ■ Warning messages lever may be shown on the multi- information display.
  • Page 454 ■ If a message that indicates the vent may be blocked, or there may need for visiting your Toyota be a gap in the duct. Therefore, dealer is displayed perform the following correction procedure.
  • Page 455 7-2. Steps to take in an emergency ■ If “Traction Battery Needs to be ■ If “Maintenance Required Protected Shift into P to Soon” is shown Restart” is shown Indicates that all maintenance This message is displayed when the according to the driven distance on hybrid battery (traction battery) the maintenance schedule should...
  • Page 456 Indicates that the engine oil should P.449 be changed. Check and change the engine oil, WARNING and oil filter by your Toyota dealer. ■ If a warning light comes on or After changing the engine oil, make a warning buzzer sounds sure to reset the message.
  • Page 457: If You Have A Flat Tire

    7-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P.397 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
  • Page 458 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Towing eyelet Jack handle Wheel nut wrench Spare tire Jack ● Only use the tire jack that WARNING comes with this vehicle for ■ Using the tire jack replacing a flat tire.
  • Page 459 7-2. Steps to take in an emergency Take out the jack. WARNING ● Do not put any part of your body under the vehicle while it is sup- ported by the jack. ● Do not start the hybrid system or drive the vehicle while the vehicle is supported by the jack.
  • Page 460 7-2. Steps to take in an emergency Turn the tire jack portion WARNING by hand until the notch of the ■ When storing the spare tire jack is in contact with the jack Be careful not to catch fingers or point.
  • Page 461 • If there are any cracks or defor- mations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer.
  • Page 462 7-2. Steps to take in an emergency 76 ft•lbf (103 N•m, 10.5 kgf•m) wheel ( Stow the flat tire, tire jack and When replacing an aluminum wheel all tools. with a steel wheel, tighten the wheel nuts until the tapered portion ■...
  • Page 463 Replace the flat front tire with the • Panoramic view monitor (if tire removed from the rear of the equipped) vehicle. • Toyota parking assist monitor (if Fit tire chains to the front tires. equipped) • Intuitive parking assist (if WARNING equipped) ■...
  • Page 464: If The Hybrid System Will Not Start

     The electronic key may not be warning valve and transmitter, functioning properly. contact your Toyota dealer as the (P.467) tire pressure warning valve and transmitter may be damaged if not  There may not be sufficient handled correctly.
  • Page 465 Have the vehicle inspected discharged. (P.469) by your Toyota dealer.  One or both of the 12-volt bat- tery terminals may be discon- nected. (P.396) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
  • Page 466: If You Lose Your Keys

    If you lose your keys If the fuel filler door cannot be opened New genuine keys can be made by your Toyota dealer If the fuel filler door opener using the other key and the switch cannot be operated, key number stamped on contact your Toyota dealer your key number plate.
  • Page 467: If The Electronic Key Does Not Operate Properly

    In case of a smart key system malfunction, or other key related problems Take your vehicle with all the electronic keys provided with your vehicle to your Toyota dealer. Locking and unlocking the doors Use the mechanical key (P.130) in order to perform the...
  • Page 468 ACC. Opens the windows (turn and hold) : These settings must be custom- ized at your Toyota dealer. Firmly depress the brake pedal and check that is dis-...
  • Page 469: If The 12-Volt Battery Is Discharged

    In the event that the hybrid system charged. still cannot be started, contact your Toyota dealer. You can also call your Toyota dealer or a qualified ■ Stopping the hybrid system repair shop. Shift the shift lever to P, set the...
  • Page 470 7-2. Steps to take in an emergency Open the exclusive jump up the cover. starting terminal cover. Connect a positive jumper cable clamp to on your vehicle and connect the clamp on the other end of the positive cable to the second vehicle.
  • Page 471 12-volt battery have the vehicle inspected at ● In some cases, it may not be pos- your Toyota dealer as soon as sible to unlock the doors using the possible. smart key system when the 12- volt battery is discharged. Use the wireless remote control or the ■...
  • Page 472 12-volt battery may be plugged.) was discharged. Before discon- For details, consult your Toyota necting the 12-volt battery, turn dealer. the power switch off. If you are unsure what mode the...
  • Page 473 ● Do not allow the other end of Have the 12-volt battery the jumper cable connected to inspected at your Toyota dealer the “+” terminal to come into as soon as possible. contact with any other parts or If the 12-volt battery is deteriorat-...
  • Page 474: If Your Vehicle Overheats

    7-2. Steps to take in an emergency If your vehicle over- NOTICE heats ■ To prevent damaging the vehicle The exclusive jump starting termi- The following may indicate nal is to be used when charging that your vehicle is over- the 12-volt battery from another heating.
  • Page 475 After the hybrid system has If water was added in an emer- gency, have the vehicle inspected cooled down sufficiently, at your Toyota dealer as soon as inspect the hoses and radia- possible. tor core (radiator) for any leaks.
  • Page 476 If water was added in an emer- hoses and radiator core (radi- gency, have the vehicle inspected ator) for any leaks. at your Toyota dealer as soon as possible. Radiator After stopping the hybrid sys- Cooling fan...
  • Page 477 To prevent damage to the driven normally. cooling system However, if the message appears Observe the following precau- again frequently, contact your tions: Toyota dealer. ● Avoid contaminating the coolant with foreign matter (such as WARNING sand or dust, etc.). ■...
  • Page 478: If The Vehicle Becomes Stuck

    7-2. Steps to take in an emergency If the vehicle becomes WARNING stuck ■ When attempting to free a stuck vehicle If you choose to push the vehicle Carry out the following pro- back and forth to free it, make cedures if the tires spin or sure the surrounding area is clear the vehicle becomes stuck...
  • Page 479: Vehicle Specifications

    Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)....Fuel information ..Tire information ... 8-2. Customization Customizable features 8-3. Initialization Items to initialize ..
  • Page 480: Maintenance Data

    The vehicle identification num- ber (VIN) is the legal identifier for your vehicle. This is the pri- mary identification number for your Toyota. It is used in regis- tering the ownership of your vehicle. This number is stamped under the right-hand front seat.
  • Page 481 8-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. This number is also on the Certi- fication Regulation Label. Engine Model 2.5 L 4-cylinder (A25A-FXS) Type 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.44 ...
  • Page 482 Warm up and turn off the hybrid system, wait more than 5 minutes, and check the oil level on the dipstick. Engine oil selection grade and viscosity. ■ “Toyota Genuine Motor Oil” is Oil grade: used in your Toyota vehicle. API SN/RC multigrade engine Use Toyota approved “Toyota Genuine Motor Oil”...
  • Page 483  Similar high-quality ethylene gly- col-based non-silicate, non-amine, Coolant type non-nitrite, and non-borate cool- ant with long-life hybrid organic acid technology Do not use plain water alone. : The coolant capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer.
  • Page 484 Fluid capacity Fluid type Toyota Genuine ATF WS : The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer. NOTICE ■ Hybrid transmission fluid type Using transmission fluid other than the above type may cause abnormal noise or vibration, or ultimately damage the transmission of your vehicle.
  • Page 485 8-1. Specifications If replacement is necessary, contact your Toyota dealer. NOTICE ■ Rear differential fluid type Using differential fluid other than the above type may cause abnormal noise or vibration, or ultimately damage the differential of your vehicle. Brakes 5.1 in. (129 mm) Min.
  • Page 486 8-1. Specifications Vehicles with 18-inch wheels (type B)  225/60R18 100H, T165/80D17 104M Tire size (spare) Front: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure Rear: (Recommended cold tire infla- 33 psi (230 kPa, 2.3 kgf/cm or bar) tion pressure) Spare: 60 psi (420 kPa, 4.2 kgf/cm...
  • Page 487 8-1. Specifications Vehicles with 19-inch wheels (type B)  225/55R19 99V, T165/80D17 104M Tire size (spare) Front: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure Rear: (Recommended cold tire infla- 33 psi (230 kPa, 2.3 kgf/cm or bar) tion pressure) Spare: 60 psi (420 kPa, 4.2 kgf/cm...
  • Page 488: Fuel Information

    ● If you use gasohol in your vehicle, ● Toyota recommends the use of be sure that it has an octane rat- gasoline that contains detergent ing no lower than 87. additives to avoid the build-up of engine deposits.
  • Page 489 Take care not to spill gasohol. It The malfunction indicator lamp on can damage your vehicle’s paint. the instrument cluster may come on. If this happens, contact your Toyota dealer for service. ■ If your engine knocks ●...
  • Page 490: Tire Information

    8-1. Specifications Tire information Typical tire symbols Full-size tire  Compact spare tire  Tire size (P.492) DOT and Tire Identification Number (TIN) (P.491) Location of treadwear indicators (P.397) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
  • Page 491 8-1. Specifications Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pres- sure.
  • Page 492 8-1. Specifications Type B (P = Passenger car,  T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 dig- DOT symbol its) Tire Identification Number...
  • Page 493 Your Toyota dealer will help answer and concrete. any questions you may have as you read this information. A tire marked C may have poor DOT quality grades ■...
  • Page 494 8-1. Specifications Temperature A, B, C performance which all passenger ■ car tires must meet under the Fed- The temperature grades are A eral Motor Vehicle Safety Standard (the highest), B, and C, repre- No. 109. senting the tire’s resistance to Grades B and A represent higher the generation of heat and its levels of performance on the labo-...
  • Page 495 8-1. Specifications Tire related term Meaning The sum of: (a) Curb weight Maximum loaded vehicle (b) Accessory weight weight (c) Vehicle capacity weight (d) Production options weight 150 lb. (68 kg) times the number of occupants Normal occupant weight specified in the second column of Table 1 that follows Distribution of occupants in a vehicle as speci-...
  • Page 496 8-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
  • Page 497 8-1. Specifications Tire related term Meaning (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other Intended outboard side- sidewall of the tire, or wall (b)The outward facing sidewall of an asymmetri- cal tire that has a particular side that must...
  • Page 498 8-1. Specifications Tire related term Meaning A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load A pneumatic tire in which the ply cords that Radial ply tire extend to the beads are laid at substantially 90...
  • Page 499 8-1. Specifications Tire related term Meaning The projections within the principal grooves Treadwear indicators designed to give a visual indication of the (TWI) degrees of wear of the tread The fixture used to hold the wheel and tire Wheel-holding fixture assembly securely during testing : Table 1 ...
  • Page 500: 8-2. Customization

    The method of performing detailed navigation/multimedia sys- setting differs for each screen. tem, or at your Toyota Please refer to the advice sentence displayed on the screen. dealer. To go back to the previous screen or exit the customize mode, press...
  • Page 501 Customizable Features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Settings that can be changed using the navigation system or mul- timedia system...
  • Page 502 8-2. Customization Gauges, meters and multi-information display (P.87, 91, 94, ■ 105) Customized Default setting Function setting “Français can- adien” (Canadian French) “English” Language – – (English) “Español mexi- cano” (Mexican Spanish) km (km/L) miles (MPG km (L/100 km) – –...
  • Page 503 8-2. Customization Customized Default setting Function setting Average Drive information items (first Speed Distance – – item) Total Time Average Drive information items (sec- Speed Total Time – – ond item) Distance “ECO Guid- “Drive Info” – – “Trip Summary” ance”...
  • Page 504 8-2. Customization Customized Function Default setting setting Tachometer Hybrid Sys- Tachometer settings – – tem Indicator No content – – Navigation display Driving support system dis- – – play – – Compass Audio system operation sta- – – : If equipped Door lock (P.131, 467) ■...
  • Page 505 8-2. Customization Smart key system and wireless remote control (P.130, 148) ■ Customized Function Default setting setting Operation signal (emer- – gency flashers) Operation buzzer volume – 1 to 7 Time elapsed before the automatic door lock function 60 seconds 30 seconds –...
  • Page 506 8-2. Customization Wireless remote control (P.130) ■ Customized Function Default setting setting Wireless remote control – – Driver’s door unlocked in All doors first step, all Unlocking operation unlocked in – doors first step unlocked in second step Theft deterrent panic mode –...
  • Page 507 8-2. Customization Customized Function Default setting setting Operation buzzer while the – – back door is operating 1 to 4 Opening angle – – User setting Automatic closing of the back – – door when lowered Automatic opening of the back door using the back –...
  • Page 508 8-2. Customization Enabling easier driver entry and exit (power easy access sys- ■ tem) (P.158) Customized Function Default setting setting Driver’s seat slide move- ment when exiting the vehi- Full – Partial Tilt only steering wheel movement Tilt & tele- Telescopic –...
  • Page 509 8-2. Customization Lights (P.214) ■ Customized Function Default setting setting – Daytime Running Lights Light reminder buzzer – – Welcome lamp – – : Except for Canada Automatic light control system (P.214) ■ Customized Function Default setting setting Light sensor sensitivity Standard –2 to 2 –...
  • Page 510 8-2. Customization Customized Function Default setting setting Early Adjust alert timing Middle – – Late LTA (Lane Tracing Assist) (P.243) ■ Customized Function Default setting setting Lane centering function – – Steering assist function – – Steering wheel Alert buzzer –...
  • Page 511 8-2. Customization BSM (Blind Spot Monitor) (P.267) ■ Customized Function Default setting setting BSM (Blind Spot Monitor) – – Outside rear view mirror indi- Bright – – cator brightness Early Late Alert timing for presence of approaching vehicle (sensi- Intermediate Only when –...
  • Page 512 8-2. Customization PKSB (Parking Support Brake) (P.283) ■ Customized Function Default setting setting PKSB (Parking Support – – Brake) function : If equipped Automatic air conditioning system (P.314, 321) ■ Customized Function Default setting setting A/C Auto switch operation – Illumination (P.334) ■...
  • Page 513 8-2. Customization Panoramic fixed moon roof with one-touch frosted glass con- ■ trol (P.347) Customized Function Default setting setting Opaque/transparent state memory function when the – – power switch is turned to : If equipped ■ Vehicle customization ● When the speed linked door locking function and shift position linked door locking function are both on, the door lock operates as follows.
  • Page 514: 8-3. Initialization

    • When rotating the tires • When changing the tire Tire pressure warning system P.404 • After registering the ID codes Refer to the Toyota parking assist monitor “NAVIGA- TION AND • After reconnecting or chang- MULTIME- ing the battery DIA SYS- Panoramic view monitor •...
  • Page 515: For Owners

    For owners 9-1. For owners Reporting safety defects for U.S. owners....Seat belt instructions for Canadian owners (in French)...... SRS airbag instructions for Canadian owners (in French)...... Headlight aim instructions for Canadian owners (in French)......
  • Page 516: Reporting Safety Defects For U.s. Owners

    National Highway Traffic other information about Safety Administration motor vehicle safety from (NHTSA) in addition to noti- http://www.safercar.gov. fying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds...
  • Page 517: Seat Belt Instructions For Canadian Owners (In French)

    9-1. For owners Seat belt instructions Entretien et soin for Canadian owners Manipulation des ceintures ■ (in French) de sécurité Avec un chiffon ou une éponge, The following is a French nettoyez à l’aide d’un savon explanation of seat belt doux et de l’eau tiède.
  • Page 518: Srs Airbag Instructions For Canadian Owners (In French)

    9-1. For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instruc- tions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
  • Page 519 9-1. For owners Coussins gonflables SRS latéraux et en rideau  Coussins gonflables SRS latéraux avant Peuvent aider à protéger le torse des occupants des sièges avant Coussins gonflables SRS en rideau • Peuvent aider à protéger principalement la tête des occupants des sièges latéraux •...
  • Page 520 9-1. For owners Contacteur de boucle de ceinture de sécurité du passager avant Capteurs d’impact latéral (arrière) Capteur de position du siège du conducteur Coussin gonflable du conducteur Capteurs du système de classification de l’occupant du siège du passager avant Coussin gonflable de protection des genoux Lampe témoin SRS Module de capteur de coussin gonflable...
  • Page 521 9-1. For owners • Si votre volant est réglable en AVERTISSEMENT hauteur, inclinez-le vers le bas. ● Le coussin gonflable SRS du Cela vous permet d’orienter le conducteur se déploie avec une coussin gonflable vers votre force considérable et peut occa- buste plutôt que vers votre tête sionner des blessures graves, et vers votre cou.
  • Page 522 Un bébé ou un enfant trop petit pour utiliser une ceinture de sécurité doit être correctement retenu à l’aide d’un dispositif de retenue pour enfants. Toyota recommande vivement de placer et d’attacher correcte- ment tous les bébés et tous les ●...
  • Page 523 9-1. For owners ● N’accrochez pas de cintres ni AVERTISSEMENT d’autres objets rigides sur les ● Ne laissez personne s’age- crochets porte-vêtements. Tous nouiller face à la portière sur le ces objets pourraient se trans- siège du passager ni sortir la former en projectiles et vous tête ou les mains à...
  • Page 524 Ne mettez pas votre véhicule au rebut et n’effectuez aucune des modifications suivantes sans d’abord consulter votre conces- sionnaire Toyota. Les coussins gonflables SRS pourraient fonctionner de manière incor- recte ou se déployer (gonfler) accidentellement, ce qui serait susceptible d’occasionner des...
  • Page 525: Headlight Aim Instructions For Canadian Owners (In French)

     Assurez-vous que le réservoir phares en suivant cette procédure, apportez le véhicule chez votre de carburant du véhicule est concessionnaire Toyota afin qu’il plein et que la partie de car- règle la portée des phares. rosserie située autour des phares n’est pas déformée.
  • Page 526 9-1. For owners...
  • Page 527 Index What to do if... (Trouble- shooting) ....Alphabetical Index ..
  • Page 528  If you lose your keys or and then unlock the child-pro- mechanical keys, new genu- tector lock. (P.135) ine keys or mechanical keys can be made by your Toyota If you think something is dealer. (P.466) wrong  If you lose your electronic...
  • Page 529 What to do if... (Troubleshooting) tem can be started in a tem- ing) for a period of time. porary way. (P.468) (P.200)  Is the 12-volt battery dis- A warning buzzer sounds charged? (P.469) during driving The shift lever cannot be ...
  • Page 530 What to do if... (Troubleshooting) (P.453) A warning light turns on or a warning message is displayed  When a warning light turns on or a warning message is dis- played, refer to P.442, 453. When a problem has occurred If you have a flat tire ...
  • Page 531 Alphabetical Index Alphabetical Index Side and curtain shield airbags operating conditions .....34 A/C ........314, 321 Side and curtain shield airbags Air conditioning filter.....415 precautions......36 Automatic air conditioning sys- SRS airbags ......31 tem ......314, 321 SRS warning light ....443 Eco air conditioning mode Air conditioning filter .....415 ........315, 323 Air conditioning system.314, 321...
  • Page 532 Alphabetical Index Exterior .........370 Interior ........373 Back door........136 Seat belts ......373 Hands Free Power Back Door Cargo capacity....191, 194 ...........139 Chains........308 Power back door ....137 Child-protectors......135 Wireless remote control ..137 Child restraint system....48 Back-up lights Fixed with a LATCH system ...57 Replacing light bulbs ....431 Fixed with a seat belt....52 Battery (12-volt battery) ..394...
  • Page 533 Intuitive parking assist ..276 Coat hooks......360 LTA (Lane Tracing Assist) ..248 Condenser ......392 Multi-information display.94, 105 Console box......339 RCTA........267 Consumption screen....120 Toyota multi-operation touch 345 Coolant Warning messages....453 Checking ......391 Do-it-yourself maintenance Preparing and checking before ........378, 383 winter........306 Door lock Warning light ......443...
  • Page 534 Alphabetical Index Memory recall function ..160 If you have a flat tire .....457 Driving support system informa- If you lose your keys.....466 tion display .....98, 109 If you think something is wrong Dynamic radar cruise control ...........440 with full-speed range If your vehicle becomes stuck Function .......256 ...........478...
  • Page 535 Alphabetical Index Event data recorder (EDR)..8 Gas station information ..548 EV indicator ......69 Information ......488 EV Ratio ........98 Refueling ......226 Type ......481, 488 Warning light ......448 Fuel filler door......227 Flat tire ........457 If the fuel filler door cannot be Tire pressure warning system opened .......466 ...........400 Refueling ......226...
  • Page 536 Alphabetical Index Automatic air conditioning sys- ........87, 91, 116 tem ......314, 321 Hybrid transmission....204 Heated steering wheel ..331 S mode .........206 Outside rear view mirrors ........316, 323 Seat heaters......331 I/M test ........381 High mounted stoplight Identification Replacing light bulbs ....431 Engine ........481 Hill-start assist control ..299 Vehicle........480...
  • Page 537 Alphabetical Index Power back door ....141 Automatic High Beam system Power windows ....179 ...........217 Front interior lights....335 Headlight switch ....214 Interior lights ......335 Keyless entry Personal lights ......336 Smart key system....148 Rear interior light ....336 Wireless remote control ..130 Replacing light bulbs ....431 Keys.........128 Turn signal lever ....207 Battery-saving function..149...
  • Page 538 Alphabetical Index gers ......316, 323 Outside rear view mirrors ..177 Odometer......87, 91 Vanity mirrors .......349 “ODO TRIP” switch...89, 93 Multi-information display Odometer and trip meter display Audio system-linked display “ODO TRIP” switch...89, 93 ........99, 110 “ODO TRIP” switch ....89, 93 Changing the display..95, 105 Display contents.....94, 105 Engine oil......482...
  • Page 539 Alphabetical Index Parking lights tion........180 Light switch ......214 Jam protection function ..179 Replacing light bulbs ....431 Operation......179 Parking Support Brake (PKSB) Window lock switch ....181 ..........283 Pre-Collision System (PCS) Indicator .........85 Enabling/disabling the pre-colli- Parking Support Brake function sion system ......237 (rear-crossing vehicles)..293 Function........235 Parking Support Brake function...
  • Page 540 Rain-sensing windshield wipers How your child should wear the ...........222 seat belt........28 RCTA........270 Pregnant women, proper seat Toyota Safety Sense 2.0 ..229 belt use.........27 Service plug ......72 Reminder light and buzzer Service reminder message ..378 ........449, 449 Shift lever ........204 Seat belt extender ....28...
  • Page 541 Alphabetical Index Side airbags ......31 Stuck Side doors.......131 If the vehicle becomes stuck 478 Side marker lights Suggestion function..103, 114 Light switch ......214 Sunshade ........347 Replacing light bulbs ....431 Sun visors .......349 Side mirrors ......177 Switches Adjustment ......177 “ODO TRIP” switch...89, 93 BSM (Blind Spot Monitor)..267 “SOS”...
  • Page 542 Towing eyelet ....439, 458 Tire inflation pressure Trailer towing ......195 Maintenance data....485 Toyota multi-operation touch 345 Tire inflation pressure display Toyota Safety Sense 2.0 ..229 function.......400 Automatic High Beam...217 Warning light ......448 Dynamic radar cruise control Tire information ......490 with full-speed range ..256 Glossary .......494...
  • Page 543 Alphabetical Index Specification......482 cator ........445 Warning messages ....76 Intuitive parking assist ..276 Traction Control (TRAC) ..299 Low engine oil pressure ..443 Traction motor (electric motor)68 LTA (Lane Tracing Assist) ..243 Trailer towing......195 LTA indicator ......445 Transmission Open door ......134 Driving mode select switch...297 Open hood......134 Hybrid transmission....204 PKSB OFF indicator .....445...
  • Page 544 Cargo capacity .....191, 194 Load limits ......194 · Navigation system Weight ........480 · Audio system Wheels........414 · Toyota parking assist monitor Replacing wheels ....414 · Panoramic view monitor Size ........485 Window glasses Power windows ....179 Window lock switch ....181 Windows Power windows ....179...
  • Page 545 Alphabetical Index...
  • Page 546 Alphabetical Index...
  • Page 547 Alphabetical Index...
  • Page 548 GAS STATION INFORMATION Auxiliary catch lever (P.385) Power back door switch (P.137) Fuel filler door opener switch (P.227) Fuel filler door (P.227) Tire inflation pressure (P.485) Hood lock release lever (P.385) Fuel tank capacity 14.5 gal. (55 L, 12.1 Imp.gal.) (Reference) Fuel type Unleaded gasoline only...

Table of Contents