How To Turn On The Light And How To Use The Wiper; Light Switch; Make It A High Beam - Toyota Vitz Manual

2‑3. How to turn on the light and how to use the wiper
Light switch
You can turn on the headlights etc. automatically or manually.
When you turn the end of the lever, the light turns on as follows.
Make it a high beam
Car side lights, tail lights, number lights,
Turn on the meter light
Above lights and head
Turn on the light
*
Headlights, side lights
Etc. are automatically turned on / off
The engine switch is
"ON" (smart ent)
Lee & Start System
Non‑equipped vehicle) or "engine
Start Stop "
Itch is the ignition
ON mode (Smart En
Tree & Start System
When the car is equipped with
Turn off to high beam when the light is on
change
Low when the lever is returned to its original position
Return to the beam.
While pulling the lever, c
Turn on the beam
High beam even when the light is off
Lights up. When you release the lever, it 's low.
Return to the beam or turn it off.
: Different equipment and optional equipment depending on the vehicle model, etc.
*
2
luck
Turn
vinegar
NS
When
tree
NS
159