After A Fuse Is Replaced; To Prevent System Breakdowns And Vehicle Fire - Toyota Tacoma 2013 Owner's Manual

After a fuse is replaced

■
If the lights do not turn on even after the fuse has been replaced, a bulb
●
may need replacement. (→P. 382)
If the replaced fuse blows again, have the vehicle inspected by your
●
Toyota dealer.
If there is an overload in the circuits
■
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION

To prevent system breakdowns and vehicle fire

■
Observe the following precautions.
Failing to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than indicated, or use any
●
other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuse or the fuse box.
●
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by your Toy-
ota dealer as soon as possible.
4-3. Do-it-yourself maintenance
4
381