After A Fuse Is Replaced; If There Is An Overload In A Circuit - Toyota Mirai 2017 Owner's Manual

After a fuse is replaced

■
If the lights do not turn on even after the fuse has been replaced, a bulb may
●
need replacement. (→P. 358)
If the replaced fuse blows again, have the vehicle inspected by your Toyota
●
dealer.

If there is an overload in a circuit

■
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
To prevent system breakdowns and vehicle fire
■
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
●
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
●
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
7-3. Do-it-yourself maintenance
357
7