Step 7-Mounting The Ls300; Mounting Brackets; Flat Surface Mount - Sierra Wireless AirLink LS300 Hardware User's Manual

AirLink LS300 Hardware User Guide
28
• Location monitoring, including world map views.
• Complete ALEOS reporting and configuration, including historical views of
ALEOS information.
• Configure individual devices or use templates to perform batch configurations
of your AirLink devices.
• Single click over-the-air firmware updates to all your devices.
• Compatible with all carriers or mobile network operators.
To get started either call your AirLink reseller or visit:
www.sierrawireless.com/productsandservices/AirVantage_M2M_Cloud.aspx
Configuring with AT Commands
For a complete list of AT commands, refer to the ALEOS Software Configuration
User Guide.
Step 7—Mounting the LS300
Warning:
This device is not intended for use close to the human body. Antennas should
be at least 8 inches (20 cm) away from the operator.
Mount the device where:
• There is easy access to the cables
• Cables are not bent, constricted, close to high amperages or exposed to
extreme temperatures
• The front panel LEDs are easily visible
• There is adequate airflow
• It is away from direct exposure to the elements, such as sun, rain, dust, etc.
• It will not be hit or come into contact with people, cargo, tools, equipment, etc.

Mounting Brackets

Sierra Wireless has two mounting bracket kits.
• Mounting Bracket —Screw in for LS300 (P/N 6000571) for use on flat
surfaces, including walls or counters.
• DIN Rail Mounting Bracket for LS300 (P/N 6000558)

Flat Surface Mount

If you are mounting the LS300 on a flat surface, order mounting bracket kit
P/N 6000571 (Mounting Bracket —Screw in for LS300) from Sierra Wireless. The
kit contains:
• Bracket – Qty 1
• Screw M3 – Qty 4
• Screw M4 – Qty 4
4112895